On 17.12.2008 04:39, Carl-Daniel Hailfinger wrote: > Hi all, > > my Asus M2A-VM (690G/SB600) is working and boots to memtest and FILO. > > Memtest works fine over serial (well, I only ran memtest until it > reached 15%). > FILO can load the kernel, but I didn't have time to enable serial output > for my kernel. > > Thanks to Zheng Bao for adding support for my 690G graphics. > > I'll post a patch soon. Right now, there are a few more bugs to fix. The > ncHT fixup is already known, a clean patch will come tomorrow. > > On a first boot, I get an endless loop of > > drive detection fail,trying... > > until I press the reset button. After that, it boots fine. That message > is in the SB600 code. I will enable some debugging that was disabled in > revision 3785. > > Another curiosity is that my power button has become ineffective. It > simply initiates a reboot instead of switching off the machine after 4 > seconds. That happens only with the FILO payload. >
Oh, and it does not find more than 2 GB of RAM. I'll try to debug that as well. Right now, I'm happy that it gets to FILO and can load a kernel. The interrupts are probably wrong. I need to check that. Regards, Carl-Daniel -- http://www.hailfinger.org/ -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
