> -----Original Message----- > From: Marc Jones [mailto:[email protected]] > Sent: Monday, December 22, 2008 11:41 PM > To: Myles Watson > Cc: Coreboot; yhlu; [email protected] > Subject: Re: Good v3 port candidate for Socket F > > On Mon, Dec 22, 2008 at 4:21 PM, Myles Watson <[email protected]> wrote: > > All, > > > > I'm looking for a system to port to v3. It needs to be Dual socket F. > > > > Here's the "simplified" block diagram of the system that I have: > > > > Opteron - Opteron > > | > > Chipset > > | > > PCIe > > > > And the system that I need: > > > > Opteron - Opteron > > | | > > PCIe Chipset > > > > Notice that the second socket has an independent link to a PCIe > controller. > > > > The Tyan s2895 would work, but I need socket F. > > > > My question is if you know of any Socket F systems that would fit the > bill. > > I'm especially interested in what chipsets they use. I'd like to port > it to > > Coreboot-v3. > > I am not sure what you mean. You want a HT-PCIe bridge that isn't a > tunnel to the southbridge?
Yes. I want to be able to control the PCIe slot from the second socket without going through the BSP. > Have you looked at serverworks/broadcom boards? No. Is there a chipset that supports socket F from v2 that I could port to v3? Thanks, Myles -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
