Do most normal motherboards supply +5V on pin 7 of their SATA connectors to make this work?
Are you using them on an off-the-shelf motherboard? This looks like something intended for an embedded design, where you make your connector a non-standard pinout to support it. On Mon, Jan 12, 2009 at 4:03 PM, Dan Lykowski <engineerguy3...@yahoo.com> wrote: > I would suggest this part: > http://www.innodisk.com/flashstorage_specification.jsp?flashid=29 > They plug right in to the SATA port. > They have a minor quirk where you have to 'force.libata=1:1.5g' to get them > to work under Linux but that is the only negative I have run across so far. > > Dan Lykowski > > --- On Mon, 1/12/09, Peter Stuge <pe...@stuge.se> wrote: > > From: Peter Stuge <pe...@stuge.se> > Subject: Re: [coreboot] SCALE > To: coreboot@coreboot.org > Date: Monday, January 12, 2009, 2:55 PM > > > -----Inline Attachment Follows----- > > ron minnich wrote: >> I'd like to have the 5 second "boot to X" demo at the table. If >> somebody can help direct me to getting that set up, I'd appreciate >> it. > > If you don't want to cram everything into a 16Mbit flash chip, which > could be tight, you need some ATA flash to store apps on. > > Since the dbm690 has an LPC PLCC socket you can use the dongle and my > adapter plug though, that way you have 32Mbit which is already more > roomy. > > Maybe the dongle occupied for the ALIX already? > > > //Peter > > -- > coreboot mailing list: coreboot@coreboot.org > http://www.coreboot.org/mailman/listinfo/coreboot > > > -- > coreboot mailing list: coreboot@coreboot.org > http://www.coreboot.org/mailman/listinfo/coreboot > -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot