Myles Watson wrote:
I've never actually built s4882, but it should have worked. Can you build
Coreboot for any other boards?
I have not tried, but I have no other computers I want to run
continuously for main use in the next few months.
you could try buildrom if you want a simple way of trying a different build.
svn co svn://svn.coreboot.org/buildrom/buildrom-devel
make menuconfig
make
I did that, then did not see Opterons listed in it or on
coreboot.org/buildrom/.
Configure it for platform tyan s2892 and payload grub2.
If that doesn't work, or if that works and you still can't build for the
s4882, we'll have to figure something else out
I thought I read in the archives that someone patched coreboot for s4882
when it was (nearly) new (2005) and said that it worked for it and many
other boards.
--David
(PS. the error being discussed:
~/coreboot-v2-3923/targets/tyan/s4882/s4882# make
...
objcopy --gap-fill 0xff -O binary coreboot coreboot.strip
make[1]: *** No rule to make target `../grub2.elf', needed by
`payload'. Stop.
make[1]: Leaving directory
`/root/coreboot-v2-3923/targets/tyan/s4882/s4882/normal'
make: *** [normal/coreboot.rom] Error 1)
~/coreboot-v2-3923/targets/tyan/s4882/s4882#/ls -l grub2:
-rw-r--r-- 1 root root 18973 2009-02-02 14:15 grub2.elf
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
