Hi all, I'm seeing some weird behavior with seabios on the asus m2a-vm. The machine boots fine with filo:
http://ward.vandewege.net/coreboot/m2a-vm/m2a-vm-filo.cap If I use seabios as a payload and leave CONFIG_BOOTMENU enabled, seabios hangs on boot - but it's not entirely dead as pushing num lock, caps lock or scroll lock results in this on the serial console: i8042 ctr old=00000061 new=00000060 i8042 ctr old=00000061 new=00000060 I tracked the hang down to the line while (get_keystroke(0) >= 0) ; in src/boot.c. Here's the boot log: http://ward.vandewege.net/coreboot/m2a-vm/m2a-vm-seabios-hang.cap If I disable CONFIG_BOOTMENU, seabios does not hang but things go pretty badly: http://ward.vandewege.net/coreboot/m2a-vm/m2a-vm-seabios-no-menu.cap The IRQs seem to be messed up, and there seem to be some serious SATA issues with the AHCI driver segfaulting and no sata drives being properly detected by the kernel. This is my config.h: http://ward.vandewege.net/coreboot/m2a-vm/m2a-vm-seabios-no-menu-config.h Any suggestions for what might be going wrong? Ultimately I'd like to try seabios with a sata controller whose option rom hangs the coreboot emulator. Thanks, Ward. -- Ward Vandewege <[email protected]> Free Software Foundation - Senior Systems Administrator -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
