On Mon, 23 Feb 2009 19:03:15 +0800, andery lin <[email protected]> wrote: > Dear Sir, > > I do following procedure: > 1. Modify ../filo-0.4.2/Config > change to AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda2 > console=ttyS0,115200" > 2. make for [filo-0.4.2] > 3. vi ../coreboot-v2/targets/amd/dbm690t/Config.lb > 4. change to payload > /usr/local/linuxbios/coreboot-v2/filo-0.4.2/filo.elf > 5. .. /targets/amd/dbm690t/dbm690t make > 6. cat video.bios.bin coreboot.rom >> LinuxBios.rom > 7. inuxBios.rom write to flash > 8. I had setup Fedora9 to my hard disk and in normal BIOS flash, it > could > boot up. > So, I change to Coreboot BIOS flash and then it could not boot up. > I don't know why was show "file not found " > > How to modify the "filo Config" ? > My fedora9 ==> /boot/grub/menu.lst > root(hd0,0) > kernel / vmlinuz-2.6.24-14.fc9.i686 ro > root=UUID=1fef4ac9-c286-4c63-a9f6-f27869d4328c rhgb quiet > initrd /initrd-2.6.25-14.fc9.i686.img > > So coreboot ../filo-0.4.2/Config > change to AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda2 > console=ttyS0,115200" > or > change to AUTOBOOT_FILE = "hda0:/vmlinuz root=/dev/hda1 > console=ttyS0,115200" > Is right? but it could not work. > > Those are error message as attached pitcher.Thanks a lot. > try AUTOBOOT_FILE = "hda0:/vmlinuz-2.6.24-14.fc9.i686 ro root=UUID=1fef4ac9-c286-4c63-a9f6-f27869d4328c rhgb quiet initrd=/initrd-2.6.25-14.fc9.i686.img -- Thanks, Joseph Smith Set-Top-Linux www.settoplinux.org -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
