On Thu, Apr 30, 2009 at 09:24:22AM -0600, Myles Watson wrote: > On Thu, Apr 30, 2009 at 9:07 AM, samuel <[email protected]> wrote: > > On Thu, Apr 30, 2009 at 2:43 AM, Kevin O'Connor <[email protected]> wrote: > >> On Wed, Apr 29, 2009 at 04:53:13PM +0200, samuel wrote: > >>> lspci -vnn : http://merlin.ugent.be/~samuel/dl145g3/info/lspci-vnn.txt > > 01:0e.0 RAID bus controller [0104]: Broadcom BCM5785 [HT1000] SATA > (Native SATA Mode) [1166:024a] (prog-if 05) [...] > This forces SeaBIOS to see it as a PATA controller, but it's in SATA mode. > > Is there an easy way to add SATA support to SeaBIOS? It sounds like a > bit of work. It looks like you could force the device to be in PATA > mode, but once it's booted that's not ideal.
SeaBIOS only supports PATA mode. To the best of my knowledge, filo also only supports PATA mode drives (or SATA drives connected to a PATA compatible controller). I'm not against adding support, but I don't have the knowledge to do it at this time. -Kevin -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
