This patch sets up PIRQs in mainboard Config.lb for IP1000 and RM4100
instead of using the ones in i82801xx_lpc.c
Signed-off-by: Joseph Smith <[email protected]>
--
Thanks,
Joseph Smith
Set-Top-Linux
www.settoplinux.org
Index: src/mainboard/thomson/ip1000/Config.lb
===================================================================
--- src/mainboard/thomson/ip1000/Config.lb (revision 4257)
+++ src/mainboard/thomson/ip1000/Config.lb (working copy)
@@ -80,6 +80,15 @@
register "rom_address" = "0xfff00000"
end
chip southbridge/intel/i82801xx # Southbridge
+ register "pirqa_routing" = "0x07"
+ register "pirqb_routing" = "0x09"
+ register "pirqc_routing" = "0x0a"
+ register "pirqd_routing" = "0x09"
+ register "pirqe_routing" = "0x05"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x80"
+ register "pirqh_routing" = "0x0b"
+
device pci 1d.0 on end # USB UHCI Controller #1
device pci 1d.1 on end # USB UHCI Controller #2
device pci 1d.2 on end # USB UHCI Controller #3
Index: src/mainboard/rca/rm4100/Config.lb
===================================================================
--- src/mainboard/rca/rm4100/Config.lb (revision 4257)
+++ src/mainboard/rca/rm4100/Config.lb (working copy)
@@ -80,6 +80,15 @@
register "rom_address" = "0xfff00000"
end
chip southbridge/intel/i82801xx # Southbridge
+ register "pirqa_routing" = "0x07"
+ register "pirqb_routing" = "0x09"
+ register "pirqc_routing" = "0x0a"
+ register "pirqd_routing" = "0x09"
+ register "pirqe_routing" = "0x05"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x80"
+ register "pirqh_routing" = "0x0b"
+
device pci 1d.0 on end # USB UHCI Controller #1
device pci 1d.1 on end # USB UHCI Controller #2
device pci 1d.2 on end # USB UHCI Controller #3
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
