On Thu, May 14, 2009 at 09:19:33AM -0400, Kevin O'Connor wrote: > On Wed, May 13, 2009 at 11:23:52PM -0400, Ward Vandewege wrote: > > > which is correct (the last two digits are 00). > > > > Huh: > > > > $ v ../payloads/sgabios.bin > > -rwxr-xr-x 1 root src 3169 2009-04-29 13:56 ../payloads/sgabios.bin* > > $ tools/checksum.py <../payloads/sgabios.bin > > sum=50b76 > > Heh - sgabios isn't properly checksumming. It was just dumb luck that > my binary summed to zero. > > This is a hack, but you can use seabios' rom building tool to make it > work: > > tools/buildrom.py ../payloads/sgabios.bin sgabios-cksum.bin
Yes, that fixes the sgabios loading. Log files: with CONFIG_DEBUG_SERIAL set: http://ward.vandewege.net/coreboot/seabios/20090515-seabios-sgabios-serial-debug-on.cap (the seabios serial detection issue still persists) without CONFIG_DEBUG_SERIAL set: http://ward.vandewege.net/coreboot/seabios/20090515-seabios-sgabios-serial-debug-off.cap Now - the reason why I wanted to use sgabios, was to get the seabios console output on serial. As you can see in the logs, sgabios is loaded too late to be much use for that (after the disk detection, and after seabios prints 'Press F12 for boot menu'). If sgabios is the way to get seabios to copy console to serial, would it be possible to load the sgabios option rom (much) earlier? Thanks, Ward. -- Ward Vandewege <[email protected]> Free Software Foundation - Senior Systems Administrator -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
