Author: uwe Date: 2009-05-18 00:57:34 +0200 (Mon, 18 May 2009) New Revision: 529
Modified: trunk/Makefile trunk/flash.h trunk/flashrom.8 trunk/flashrom.c trunk/pcidev.c trunk/physmap.c trunk/sata_sii.c Log: Various smaller flashrom improvements: - Document new 'satasii' programmer in -L output and manpage. - Drop PCI_IO_BASE_ADDRESS, pci.h has such #defines already. - Beautify flashrom output and make it more consistent. - Same for the 'make' output (reordered some $CC parameters). Build-tested on i386, shouldn't break any builds, I think. - Some variable renaming and other cosmetic fixes. Signed-off-by: Uwe Hermann <[email protected]> Acked-by: Uwe Hermann <[email protected]> Modified: trunk/Makefile =================================================================== --- trunk/Makefile 2009-05-17 19:46:43 UTC (rev 528) +++ trunk/Makefile 2009-05-17 22:57:34 UTC (rev 529) @@ -46,7 +46,7 @@ $(CC) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS) flashrom.o: flashrom.c - $(CC) -c $(CFLAGS) $(SVNDEF) $(CPPFLAGS) $< -o $@ + $(CC) $(CFLAGS) $(CPPFLAGS) -c -o $@ $< $(SVNDEF) clean: rm -f $(PROGRAM) *.o Modified: trunk/flash.h =================================================================== --- trunk/flash.h 2009-05-17 19:46:43 UTC (rev 528) +++ trunk/flash.h 2009-05-17 22:57:34 UTC (rev 529) @@ -560,7 +560,6 @@ /* pcidev.c */ #define PCI_OK 0 #define PCI_NT 1 /* Not tested */ -#define PCI_IO_BASE_ADDRESS 0x10 extern uint32_t io_base_addr; extern struct pci_access *pacc; @@ -670,7 +669,6 @@ uint8_t satasii_chip_readb(const chipaddr addr); extern struct pcidev_status satas_sii[]; - /* flashrom.c */ extern int verbose; #define printf_debug(x...) { if (verbose) printf(x); } Modified: trunk/flashrom.8 =================================================================== --- trunk/flashrom.8 2009-05-17 19:46:43 UTC (rev 528) +++ trunk/flashrom.8 2009-05-17 22:57:34 UTC (rev 529) @@ -147,6 +147,8 @@ Example: .B "flashrom -p nic3com=05:04.0" .sp +.BR "* satasii" " (for flash ROMs on Silicon Image SATA/IDE controller cards)" +.sp .BR "* dummy" " (just prints all operations and accesses)" .TP .B "\-h, \-\-help" Modified: trunk/flashrom.c =================================================================== --- trunk/flashrom.c 2009-05-17 19:46:43 UTC (rev 528) +++ trunk/flashrom.c 2009-05-17 22:57:34 UTC (rev 529) @@ -543,6 +543,7 @@ printf("\nSupported PCI devices flashrom can use " "as programmer:\n\n"); print_supported_pcidevs(nics_3com); + print_supported_pcidevs(satas_sii); exit(0); } Modified: trunk/pcidev.c =================================================================== --- trunk/pcidev.c 2009-05-17 19:46:43 UTC (rev 528) +++ trunk/pcidev.c 2009-05-17 22:57:34 UTC (rev 529) @@ -42,16 +42,16 @@ continue; /* Don't use dev->base_addr[0], won't work on older libpci. */ - addr = pci_read_long(dev, PCI_IO_BASE_ADDRESS) & ~0x03; + addr = pci_read_long(dev, PCI_BASE_ADDRESS_0) & ~0x03; - printf("Found \"%s %s\" (%04x:%04x, BDF %02x:%02x.%x)\n", + printf("Found \"%s %s\" (%04x:%04x, BDF %02x:%02x.%x).\n", devs[i].vendor_name, devs[i].device_name, dev->vendor_id, dev->device_id, dev->bus, dev->dev, dev->func); if (devs[i].status == PCI_NT) { - printf("===\nThis PCI device is UNTESTED. Please email " - "a report including the 'flashrom -p xxxxxx'\n" - "output to [email protected] if it works " + printf("===\nThis PCI device is UNTESTED. Please " + "report the 'flashrom -p xxxx' output \n" + "to [email protected] if it works " "for you. Thank you for your help!\n===\n"); } @@ -98,7 +98,7 @@ exit(1); } else if (found > 1) { fprintf(stderr, "Error: Multiple supported PCI devices found. " - "Please use 'flashrom -p xxxxxx=bb:dd.f' \n" + "Use 'flashrom -p xxxx=bb:dd.f' \n" "to explicitly select the card with the given BDF " "(PCI bus, device, function).\n"); exit(1); Modified: trunk/physmap.c =================================================================== --- trunk/physmap.c 2009-05-17 19:46:43 UTC (rev 528) +++ trunk/physmap.c 2009-05-17 22:57:34 UTC (rev 529) @@ -81,18 +81,18 @@ void *physmap(const char *descr, unsigned long phys_addr, size_t len) { if (len == 0) { - printf_debug("Not mapping %s, zero size at 0x%08lx\n", - descr, phys_addr); + printf_debug("Not mapping %s, zero size at 0x%08lx.\n", + descr, phys_addr); return NULL; } if ((getpagesize() - 1) & len) { - fprintf(stderr, "Mapping %s at 0x%08lx, unaligned size 0x%lx\n", + fprintf(stderr, "Mapping %s at 0x%08lx, unaligned size 0x%lx.\n", descr, phys_addr, (unsigned long)len); } if ((getpagesize() - 1) & phys_addr) { - fprintf(stderr, "Mapping %s, 0x%lx bytes at unaligned 0x%08lx\n", + fprintf(stderr, "Mapping %s, 0x%lx bytes at unaligned 0x%08lx.\n", descr, (unsigned long)len, phys_addr); } Modified: trunk/sata_sii.c =================================================================== --- trunk/sata_sii.c 2009-05-17 19:46:43 UTC (rev 528) +++ trunk/sata_sii.c 2009-05-17 22:57:34 UTC (rev 529) @@ -15,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, , 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /* Datasheets can be found on http://www.siliconimage.com. Great thanks! */ @@ -39,6 +39,7 @@ {0x1095, 0x3124, PCI_NT, "Silicon Image", "SiI 3124 PCI-X Serial ATA Controller"}, {0x1095, 0x3132, PCI_OK, "Silicon Image", "SiI 3132 Serial ATA Raid II Controller"}, {0x1095, 0x3512, PCI_NT, "Silicon Image", "SiI 3512 [SATALink/SATARaid] Serial ATA Controller"}, + {}, }; @@ -50,33 +51,27 @@ get_io_perms(); pcidev_init(PCI_VENDOR_ID_SII, satas_sii); - id = pcidev_dev->device_id; if ((id == 0x3132) || (id == 0x3124)) { - /* BAR 0, offset 0x70 */ - addr = pci_read_long(pcidev_dev, PCI_IO_BASE_ADDRESS) & ~0x07; + addr = pci_read_long(pcidev_dev, PCI_BASE_ADDRESS_0) & ~0x07; reg_offset = 0x70; } else { - /* BAR 5, offset 0x50 */ - addr = pci_read_long(pcidev_dev, PCI_IO_BASE_ADDRESS + (5 * 4)) & ~0x07; + addr = pci_read_long(pcidev_dev, PCI_BASE_ADDRESS_5) & ~0x07; reg_offset = 0x50; } - sii_bar = physmap("SATA SIL registers", addr, 0x100); - sii_bar += reg_offset; + sii_bar = physmap("SATA SIL registers", addr, 0x100) + reg_offset; - /* check if rom cycle are OK */ - if (!(mmio_readl(sii_bar)) & (1 << 26)) { + /* Check if ROM cycle are OK. */ + if (!(mmio_readl(sii_bar)) & (1 << 26)) printf("Warning: Flash seems unconnected\n"); - } return 0; } int satasii_shutdown(void) { - free(pcidev_bdf); pci_cleanup(pacc); #if defined(__FreeBSD__) || defined(__DragonFly__) @@ -96,21 +91,19 @@ void satasii_chip_writeb(uint8_t val, chipaddr addr) { + uint32_t ctrl_reg, data_reg; - uint32_t ctrl_reg, addr_reg; - while ((ctrl_reg = mmio_readl(sii_bar)) & (1 << 25)) ; - /* Mask out unused/reserved bits, set writes and start transaction */ + /* Mask out unused/reserved bits, set writes and start transaction. */ ctrl_reg &= 0xfcf80000; ctrl_reg |= (1 << 25) | (0 << 24) | ((uint32_t) addr & 0x7ffff); - addr_reg = (mmio_readl((sii_bar + 4)) & ~0xff) | val; - mmio_writel(addr_reg, (sii_bar + 4)); + data_reg = (mmio_readl((sii_bar + 4)) & ~0xff) | val; + mmio_writel(data_reg, (sii_bar + 4)); mmio_writel(ctrl_reg, sii_bar); while (mmio_readl(sii_bar) & (1 << 25)) ; - } uint8_t satasii_chip_readb(const chipaddr addr) @@ -119,13 +112,13 @@ while ((ctrl_reg = mmio_readl(sii_bar)) & (1 << 25)) ; - /* Mask out unused/reserved bits, set reads and start transaction */ + /* Mask out unused/reserved bits, set reads and start transaction. */ ctrl_reg &= 0xfcf80000; ctrl_reg |= (1 << 25) | (1 << 24) | ((uint32_t) addr & 0x7ffff); mmio_writel(ctrl_reg, sii_bar); - while ((mmio_readl(sii_bar)) & (1 << 25)) ; + while (mmio_readl(sii_bar) & (1 << 25)) ; return (mmio_readl(sii_bar + 4)) & 0xff; } -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
