im booting up a machine with coreboot and anytime i reboot the machine
it never turns back on, i have to turn it back on by hand. i ran the
nvramtool to see the bio settings and got this:
boot_option = Normal
last_boot = Normal
ECC_memory = Enable
baud_rate = 115200
hw_scrubber = Enable
interleave_chip_selects = Enable
max_mem_clock = 166Mhz
dual_core = Enable
power_on_after_fail = Enable
debug_level = Info
boot_first = Network
boot_second = Fallback_Network
# Bad value -> boot_third = 0xf
boot_index = 0x0
boot_countdown = 0x0
slow_cpu = off
nmi = Disable
iommu = Disable
nvramtool: Can not read coreboot parameter user_data because layout info
specifies CMOS area that is too wide.
i changed the boot_on_after_fail to Enable thinking that would fix my
issue but it didnt.
does anyone have any other ideas on what other parameter could fix this?
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
