Author: uwe Date: 2009-06-02 21:54:22 +0200 (Tue, 02 Jun 2009) New Revision: 567
Modified: trunk/chipset_enable.c trunk/dummyflasher.c trunk/flash.h trunk/flashrom.8 trunk/nic3com.c Log: Mark the 10b7:9058 3COM card (3C905B: Cyclone 10/100/BNC) as "OK", forgot this in the last commit. Also do some random cleanups while I'm at it. Signed-off-by: Uwe Hermann <[email protected]> Acked-by: Uwe Hermann <[email protected]> Modified: trunk/chipset_enable.c =================================================================== --- trunk/chipset_enable.c 2009-06-02 16:45:59 UTC (rev 566) +++ trunk/chipset_enable.c 2009-06-02 19:54:22 UTC (rev 567) @@ -781,15 +781,15 @@ static int enable_flash_nvidia_nforce2(struct pci_dev *dev, const char *name) { - uint8_t tmp; + uint8_t tmp; - pci_write_byte(dev, 0x92, 0); + pci_write_byte(dev, 0x92, 0); - tmp = pci_read_byte(dev, 0x6d); - tmp |= 0x01; - pci_write_byte(dev, 0x6d, tmp); + tmp = pci_read_byte(dev, 0x6d); + tmp |= 0x01; + pci_write_byte(dev, 0x6d, tmp); - return 0; + return 0; } static int enable_flash_ck804(struct pci_dev *dev, const char *name) Modified: trunk/dummyflasher.c =================================================================== --- trunk/dummyflasher.c 2009-06-02 16:45:59 UTC (rev 566) +++ trunk/dummyflasher.c 2009-06-02 19:54:22 UTC (rev 567) @@ -66,7 +66,7 @@ if (buses_supported == CHIP_BUSTYPE_NONE) printf_debug("Support for all flash bus types disabled.\n"); free(dummytype); - return 0; + return 0; } int dummy_shutdown(void) Modified: trunk/flash.h =================================================================== --- trunk/flash.h 2009-06-02 16:45:59 UTC (rev 566) +++ trunk/flash.h 2009-06-02 19:54:22 UTC (rev 567) @@ -346,8 +346,8 @@ #define EN_29F040A 0x7F04 #define EN_29LV010 0x7F6E #define EN_29LV040A 0x7F4F /* EN_29LV040(A) */ -#define EN_29F002T 0x7F92 -#define EN_29F002B 0x7F97 +#define EN_29F002T 0x7F92 /* Also EN29F002A */ +#define EN_29F002B 0x7F97 /* Also EN29F002AN */ #define FUJITSU_ID 0x04 /* Fujitsu */ #define MBM29F400BC 0xAB Modified: trunk/flashrom.8 =================================================================== --- trunk/flashrom.8 2009-06-02 16:45:59 UTC (rev 566) +++ trunk/flashrom.8 2009-06-02 19:54:22 UTC (rev 567) @@ -133,7 +133,7 @@ .sp .BR "* satasii" " (for flash ROMs on Silicon Image SATA/IDE controllers)" .sp -.BR "* it87spi" " (for flash ROMs behind a IT87xx SuperI/O LPC/SPI translation unit)" +.BR "* it87spi" " (for flash ROMs behind an ITE IT87xx Super I/O LPC/SPI translation unit)" .sp The dummy programmer has an optional parameter specifying the bus types it should support. For that you have to use the Modified: trunk/nic3com.c =================================================================== --- trunk/nic3com.c 2009-06-02 16:45:59 UTC (rev 566) +++ trunk/nic3com.c 2009-06-02 19:54:22 UTC (rev 567) @@ -46,7 +46,7 @@ {0x10b7, 0x9006, PCI_NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2 (TPC)" }, {0x10b7, 0x900a, PCI_NT, "3COM", "3C90xB: PCI 10BASE-FL" }, {0x10b7, 0x905a, PCI_NT, "3COM", "3C90xB: PCI 10BASE-FX" }, - {0x10b7, 0x9058, PCI_NT, "3COM", "3C905B: Cyclone 10/100/BNC" }, + {0x10b7, 0x9058, PCI_OK, "3COM", "3C905B: Cyclone 10/100/BNC" }, /* 3C905C */ {0x10b7, 0x9200, PCI_OK, "3COM", "3C905C: EtherLink 10/100 PCI (TX)" }, -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
