On Mon, Jun 8, 2009 at 9:13 AM, Uwe Hermann <[email protected]> wrote: > Hi, > > I tried converting the MSI MS-6178 (i810 chipset) to CBFS by looking > at the recent CBFS patches which went in and blindly guessing what I > have to do :) It _seemed_ to work (builds fine), but doesn't boot then. I don't have the board, but I tried to see if there was anything obviously wrong.
I built images with and without CBFS, and looked at the coreboot.map and the hexdumps of the files. It looked fine to me. > I see 0x0E on the POST card, no serial output at all. I ran both images in qemu, and they both fail at the same point, but after printing a banner: coreboot-2.0.0-r4352M.0Fallback Mon Jun 8 10:27:52 MDT 2009 starting... Device not found, Corey probably screwed up! I wanted to see if the jumps were set up correctly. That makes me wonder why you get no serial output. XIP settings? They seem right, though. > Am I doing something wrong, or missing some code changes? I don't see anything. Sorry I couldn't help more. Thanks, Myles -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
