On Sat, Jun 20, 2009 at 02:32, Peter Stuge<[email protected]> wrote: > Note that only MMC (the very old cards) use 1-bit SPI. Any newer card > uses a wider interface, which means even more complex translation > logic.
Although it doesnt matter, every SD card must support 1-bit SPI (by spec). > And even if the translation state machine would be fast enough, if > e.g. it runs off it's own clock at maybe 100MHz instead of whatever > is on SPI, the consumer grade flash memory cards can themselves have > longer response times than what is allowed by the mainboard SPI. > > MMC has unlimited response times, as an example. Ie. the card can > take as long as it wants to respond, at least for writes. > > The cards can also have rather complex voltage requirements. Complex = 3.3V? (depends on the card though) > All in all, a ton of work, and even doubtful that it could succeed. > I tought of this for a while (after i sent that message) and, we'll i doubt its not even possible directly, it would need an ASIC with some serious caching to work, if possible. -- urjaman -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot

