Hi, On Sat, Jun 20, 2009 at 02:34:24AM +0100, Andrew Morgan wrote: > Here is the output of 'lspci -tvnn', 'superiotool -dV', 'getpir', > and 'mptable' run on the (beautifully named) Soyo SY-6BA+ III > motherboard.
Thanks, please see attached patch for a first attempt at a coreboot port. The board is (of course) similar to all other 440BX boards in svn. I used 256 KB as ROM chip size, is that correct for your board? Also, the Realtek NIC is onboard I assume? Or is it PCI? I assumed onboard for now. Apply the patch like this to an svn checkout: --------------------------------------------- patch -p0 < v2_soyo_board.patch Building: --------- cd targets ./buildtarget soyo/sy-6ba-plus-iii cd soyo/sy-6ba-plus-iii/sy-6ba-plus-iii cp ~/filo.elf payload.elf make The coreboot.rom file (256 KB) which is generated is what you want to flash using flashrom (see http://coreboot.org/Flashrom). Make sure you only attempt this if you know flashrom supports your board and if you have a working spare backup chip. Join us on IRC for help with this, if needed. The filo.elf is the payload which you choose, see wiki. Then, insert exactly one (64 MB or bigger) DIMM into slot 0, attach a null-modem cable to COM1 and some other box where you use minicom (115200 8n1) to view serial debug output which you'll hopefully get. If you insert a PCI graphics card and are lucky, it might also get initialized correctly, but serial is probably the safer bet for the first test. Godd luck, Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
Add support for the Soyo SY-6BA+ III board. Signed-off-by: Uwe Hermann <[email protected]> Index: src/mainboard/soyo/sy-6ba-plus-iii/Config.lb =================================================================== --- src/mainboard/soyo/sy-6ba-plus-iii/Config.lb (Revision 0) +++ src/mainboard/soyo/sy-6ba-plus-iii/Config.lb (Revision 0) @@ -0,0 +1,127 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <[email protected]> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +## XIP_ROM_SIZE must be a power of 2. +default XIP_ROM_SIZE = 64 * 1024 +include /config/nofailovercalculation.lb + +arch i386 end +driver mainboard.o +if HAVE_PIRQ_TABLE + object irq_tables.o +end +makerule ./failover.E + depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" + action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" +end +makerule ./failover.inc + depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" + action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" +end +makerule ./auto.E + # depends "$(MAINBOARD)/auto.c option_table.h ../romcc" + depends "$(MAINBOARD)/auto.c ../romcc" + action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" +end +makerule ./auto.inc + # depends "$(MAINBOARD)/auto.c option_table.h ../romcc" + depends "$(MAINBOARD)/auto.c ../romcc" + action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" +end +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds +end +mainboardinit arch/i386/lib/cpu_reset.inc +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds +if USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc +mainboardinit ./auto.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc + +dir /pc80 +config chip.h + +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/ite/it8671f # Super I/O + device pnp 370.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 370.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 370.2 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 370.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 370.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 370.6 on # PS/2 mouse + irq 0x70 = 12 + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + device pci f.0 on end # NIC (TODO: Onboard?) + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end Index: src/mainboard/soyo/sy-6ba-plus-iii/irq_tables.c =================================================================== --- src/mainboard/soyo/sy-6ba-plus-iii/irq_tables.c (Revision 0) +++ src/mainboard/soyo/sy-6ba-plus-iii/irq_tables.c (Revision 0) @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x07 << 3) | 0x0, /* Interrupt router dev */ + 0xc00, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x9c, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x0f << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x1, 0x0}, + {0x00, (0x10 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x2, 0x0}, + {0x00, (0x11 << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x3, 0x0}, + {0x00, (0x12 << 3) | 0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}}, 0x4, 0x0}, + {0x00, (0x13 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x5, 0x0}, + {0x00, (0x07 << 3) | 0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x01 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr); +} Index: src/mainboard/soyo/sy-6ba-plus-iii/Options.lb =================================================================== --- src/mainboard/soyo/sy-6ba-plus-iii/Options.lb (Revision 0) +++ src/mainboard/soyo/sy-6ba-plus-iii/Options.lb (Revision 0) @@ -0,0 +1,100 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <[email protected]> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +uses HAVE_MP_TABLE +uses CONFIG_CBFS +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_HARD_RESET +uses HAVE_OPTION_TABLE +uses USE_OPTION_TABLE +uses CONFIG_ROM_PAYLOAD +uses IRQ_SLOT_COUNT +uses MAINBOARD +uses MAINBOARD_VENDOR +uses MAINBOARD_PART_NUMBER +uses COREBOOT_EXTRA_VERSION +uses ARCH +uses FALLBACK_SIZE +uses STACK_SIZE +uses HEAP_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_PAYLOAD_START +uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses PAYLOAD_SIZE +uses _ROMBASE +uses _RAMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses HAVE_MP_TABLE +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_CONSOLE_SERIAL8250 +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses CONFIG_UDELAY_TSC +uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 +uses MAINBOARD_VENDOR +uses MAINBOARD_PART_NUMBER +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN + +default ROM_SIZE = 256 * 1024 +default HAVE_FALLBACK_BOOT = 1 +default HAVE_MP_TABLE = 0 +default HAVE_HARD_RESET = 0 +default CONFIG_UDELAY_TSC = 1 +default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 +default HAVE_PIRQ_TABLE = 1 +default IRQ_SLOT_COUNT = 0 # Override this in targets/*/Config.lb. +default MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. +default MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. +default ROM_IMAGE_SIZE = 64 * 1024 +default FALLBACK_SIZE = 128 * 1024 +default STACK_SIZE = 8 * 1024 +default HEAP_SIZE = 16 * 1024 +default HAVE_OPTION_TABLE = 0 +#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default USE_OPTION_TABLE = 0 +default _RAMBASE = 0x00004000 +default CONFIG_ROM_PAYLOAD = 1 +default CROSS_COMPILE = "" +default CC = "$(CROSS_COMPILE)gcc -m32" +default HOSTCC = "gcc" +default CONFIG_CONSOLE_SERIAL8250 = 1 +default TTYS0_BAUD = 115200 +default TTYS0_BASE = 0x3f8 +default TTYS0_LCS = 0x3 # 8n1 +default DEFAULT_CONSOLE_LOGLEVEL = 9 +default MAXIMUM_CONSOLE_LOGLEVEL = 9 +default CONFIG_CONSOLE_VGA = 1 +default CONFIG_PCI_ROM_RUN = 1 +default CONFIG_CBFS = 0 +end Index: src/mainboard/soyo/sy-6ba-plus-iii/auto.c =================================================================== --- src/mainboard/soyo/sy-6ba-plus-iii/auto.c (Revision 0) +++ src/mainboard/soyo/sy-6ba-plus-iii/auto.c (Revision 0) @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "southbridge/intel/i82371eb/i82371eb_early_smbus.c" +#include "northbridge/intel/i440bx/raminit.h" +#include "lib/debug.c" +#include "pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" +#include "superio/ite/it8671f/it8671f_early_serial.c" + +#define SERIAL_DEV PNP_DEV(0x370, IT8671F_SP1) + +static inline int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/intel/i440bx/raminit.c" +#include "northbridge/intel/i440bx/debug.c" + +static void main(unsigned long bist) +{ + if (bist == 0) + early_mtrr_init(); + + it8671f_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + report_bist_failure(bist); + enable_smbus(); + /* dump_spd_registers(); */ + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); + /* ram_check(0, 640 * 1024); */ +} Index: src/mainboard/soyo/sy-6ba-plus-iii/chip.h =================================================================== --- src/mainboard/soyo/sy-6ba-plus-iii/chip.h (Revision 0) +++ src/mainboard/soyo/sy-6ba-plus-iii/chip.h (Revision 0) @@ -0,0 +1,22 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_ops; +struct mainboard_config {}; Index: src/mainboard/soyo/sy-6ba-plus-iii/mainboard.c =================================================================== --- src/mainboard/soyo/sy-6ba-plus-iii/mainboard.c (Revision 0) +++ src/mainboard/soyo/sy-6ba-plus-iii/mainboard.c (Revision 0) @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include "chip.h" + +struct chip_operations mainboard_ops = { + CHIP_NAME("Soyo SY-6BA+ III Mainboard") +}; Index: targets/soyo/sy-6ba-plus-iii/Config.lb =================================================================== --- targets/soyo/sy-6ba-plus-iii/Config.lb (Revision 0) +++ targets/soyo/sy-6ba-plus-iii/Config.lb (Revision 0) @@ -0,0 +1,49 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <[email protected]> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +target sy-6ba-plus-iii +mainboard soyo/sy-6ba-plus-iii + +option ROM_SIZE = 256 * 1024 + +option MAINBOARD_VENDOR = "Soyo" +option MAINBOARD_PART_NUMBER = "SY-6BA+ III" + +option IRQ_SLOT_COUNT = 7 + +option DEFAULT_CONSOLE_LOGLEVEL = 9 +option MAXIMUM_CONSOLE_LOGLEVEL = 9 + +option CONFIG_CONSOLE_VGA = 1 +option CONFIG_PCI_ROM_RUN = 1 + +romimage "normal" + option USE_FALLBACK_IMAGE = 0 + option COREBOOT_EXTRA_VERSION = ".0Normal" + payload ../payload.elf +end + +romimage "fallback" + option USE_FALLBACK_IMAGE = 1 + option COREBOOT_EXTRA_VERSION = ".0Fallback" + payload ../payload.elf +end + +buildrom ./coreboot.rom ROM_SIZE "normal" "fallback"
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
