Selon Myles Watson <[email protected]>: > > > > > Note that I'm facing this on 3 boards. The 4th one is working > > properly. > > > > > On each non working board, some bits are wrong, but they are not the > > > > same, on > > > > > each board. > > > My best guess would be a timing issue. Is there a way that you can > > lengthen > > > the default delays to something safer but not too painful (2x or 3x) and > > try > > > again? > > I can try, yes, but which timing to modify ? > > What variable to update ? > > I don't know. I'm assuming that all 4 boards that you're talking about are > the same, or at least have the same chipsets. Exactly the same boards.
> > Given that I would look at the actual flash routines that get used and see > if there are timing parameters that you can play with. I checked the code, there is no timing... >From what I saw, flashrom just waits for the status returned by the flash itself. > > I'm just not that knowledgeable about flashrom. I was hoping I could point > you in the right direction since you weren't getting other responses. > > Thanks, > Myles Thx for the idea, anyway. Stephan. > > -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
