Dear coreboot readers! This is the automatic build system of coreboot.
The developer "ward" checked in revision 4393 to the coreboot repository. This caused the following changes: Change Log: Convert Supermicro H8DMR to CBFS. Also clean up some whitespace in targets/supermicro/h8dmr/Config.lb and Config-abuild.lb. Importantly, this also sets default CONFIG_AP_CODE_IN_CAR=0 in src/mainboard/supermicro/h8dmr/Options.lb which is required to make this box boot since the changes that went in in r4315. At Myles' suggestion, this patch also sets default CONFIG_USE_FAILOVER_IMAGE=0 default CONFIG_USE_FALLBACK_IMAGE=0 default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE in src/mainboard/supermicro/h8dmr/Options.lb to simplify targets/supermicro/h8dmr/Config.lb a bit further. Build tested with abuild, boot tested on physical hardware. Signed-off-by: Ward Vandewege <[email protected]> Acked-by: Myles Watson <[email protected]> Build Log: Compilation of motorola:sandpointx3_altimus_mpc7410 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4393&device=sandpointx3_altimus_mpc7410&vendor=motorola&num=2 Compilation of via:epia-m700 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4393&device=epia-m700&vendor=via&num=2 If something broke during this checkin please be a pain in ward's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
