Hi Myles,
That's the way the rest of the boards did it. I'm sorry I missed this southbridge. I thought I got them all.
Ok. Please prepare the patch.
The resource allocator will only care about the last I/O resource that you add, because it doesn't split allocations. So if you add 5 resources all under 0x1000 with the last one ending at 0x1000, or 1 resource 0x0-0x1000, it will have the same effect.
ok.
I noticed in your patch that you're setting the limit = base+size-1. The limit is not the same as the end of the resource. For most I/O, the limit should be 0xffff.
aha true. This was cut and paste from k8t890 where it was used to setup APIC resource. For mem resource it should be how? I don't understand the gran too.
For this SB (the VT8237S) we will definitely need to dynamically allocate a mmio BAR for SPI controller. I will prepare a patch, but cannot test.
I would like to ask if you care about the decoding range for flashes - if I need some other resource for that and also about 0xfee... for MSI.
Rudolf -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
