On Tue, Jul 28, 2009 at 09:17:09PM +0800, Jason Wang wrote: > > On Mon, Jul 27, 2009 at 11:42:18PM +0800, Jason Wang wrote: > > > Hi all, > > > Since DBM690T does not have UHCI controller, i bought an PCI-USB card > > > which contained two UHCI controller. But It always caused rebooting when > > the > > > option rom try to initialize the controller. I attached all of the > > messages, > > > and looking for some help. > > > Until now my doubt is the real bus/dev/func is 06/05/01, but while > > seabios > > > search it as 00/05/01. [...] > Attempting to init PCI bdf 00:13.0 (dev/ven 43871002) > Copying option rom (size 130560) from 0xfff00000 to c0800 > Checking rom 0x000c0800 (sig aa55 size 255) > Running option rom at c080:0003 > hello, initialize_usb > 00:13.0 4387:1002.0 OHCI controller > Not supported. > 00:13.1 4388:1002.1 OHCI controller > Not supported. > 00:13.2 4389:1002.2 OHCI controller > Not supported. > 00:13.3 438a:1002.3 OHCI controller > Not supported. > 00:13.4 438b:1002.4 OHCI controller > Not supported. > 00:13.5 4386:1002.5 EHCI controller > Not supported. > 06:05.0 3038:1106.0 UHCI controller
Hi Jason, As near as I can tell, you compiled seabios with OPTIONROM_VENDEV_1 and OPTIONROM_MEM_1 set. SeaBIOS then ran your rom when it got to device 00:13.0. The rom hung the machine. I don't see any issues with SeaBIOS from the log. -Kevin -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
