-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi,
In reply to: http://www.coreboot.org/pipermail/coreboot/2007-May/021716.html On Fri, May 25, 2007 at 09:40:47PM -0200, Uwe Hermann wrote: > On Tue, May 22, 2007 at 06:57:07PM -0500, Jonathan King wrote: >> Yes I am willing and able to help in any way needed! Me too, for a long time I have wanted a MB that I could run coreboot on, so I might just as well enable this one to run coreboot. That way I can also run it without an election heater ( > 8MiB GPU). Since it's being used as a home server. > Please post some more information about the mainboard: > > - lspci -n > - lspci -vv > - lspci -tv > - lspnp -v > - cat /proc/cpuinfo - dmesg - dmidecode - sensors-detect http://asbjorn.it/pub/coreboot/m2n-e/mbinfo/ > As far as I can see this board is very similar to the GIGABYTE > GA-M57SLI-S4, so for now we'll just modify that one. > > Please apply the attached patch (which doesn't really change very much). I have updated the patch to v2 trunk, and filled in the PCI bridge ids http://asbjorn.it/pub/coreboot/m2n-e/v2_asus_m2n_e_r4478.patch > Then build a FILO payload which is configured to display serial > debugging, and use the GRUB from your hard drive to boot the kernel. > Enable the maximum amount of debugging. > The result should be a /tmp/filo.elf file. FILO config: http://asbjorn.it/pub/coreboot/m2n-e/filo_config libpayload config: http://asbjorn.it/pub/coreboot/m2n-e/libpayload_config > Then build the linuxbios.rom image by doing > > $ cd targets > $ ./buildtarget gigabyte/m57sli > $ cd targets/gigabyte/m57sli/m57sli > $ make > > Please record all the serial output in a file and post it here... http://asbjorn.it/pub/coreboot/m2n-e/take1.txt CPU and chassis fans all stops shortly before loading the payload, leading to the hardware watchdog restarting the system after af couple of minutes. I didn't got past LILO because I only had SATA drives in the machine and SATA didn't work. What's the next step? How do I continue? How do I fix SATA? - -- Best regards Asbjørn Sloth Tønnesen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkpzfeIACgkQSViWlxucwuqmywCfd3kV+vKk+9hmMxb1ZZA6Y25o W8kAn0HYtXiDDTCWRtNyp+s22aezW2Pz =+TAq -----END PGP SIGNATURE----- -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
