ron minnich wrote:
On Mon, Aug 17, 2009 at 10:49 AM, Arnaud Maye<[email protected]> wrote:
Ideally we want this to operate with the card connected where the card is
actually connected to.
And that can not be determined from hardware, right? has to be set in
a Config.lb.
ron
Actually it should work because in devices\device.c is the
set_vga_bridge_bits() function. This function
scans all the devices for PCI_BASE_CLASS_DISPLAY and
PCI_CLASS_DISPLAY_OTHER. So
I guess 00.02.00 or 00.03.00 should be assigned with the
PCI_BRIDGE_CTL_VGA as it will be the
first found.
Now in the PCIe init function, the code pointed by Myles would be
correct. Actually the device with
PCI_BRIDGE_CTL_VGA set gets BCTRL.VGAEN flag set.
I think it should be ok, right?
Arnaud
*
*
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
