r4534 introduced devicetree.cb in every mainboard directory, but didn't copy any comment lines before the start of the device tree. Sometimes, these comments refer to the device tree and need to be present on devicetree.cb if Config.lb is ever dropped. Fix the amd/dbm690t target. I went through the remaining 110 boards by hand and the following files are in need of attention: amd/pistachio/Config.lb missing comment msi/ms6178/Config.lb change via/epia-m700/Config.lb change lippert/spacerunner-lx/Config.lb missing setting lippert/roadrunner-lx/Config.lb misssing setting technexion/tim8690/Config.lb misssing comment gigabyte/m57sli/Config.lb change
Signed-off-by: Carl-Daniel Hailfinger <[email protected]> Index: LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/devicetree.cb =================================================================== --- LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/devicetree.cb (Revision 4605) +++ LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/devicetree.cb (Arbeitskopie) @@ -1,3 +1,14 @@ +#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) +#Define vga_rom_address = 0xfff0000 +#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) +#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +#Define gfx_dual_slot, 0: single slot, 1: dual slot +#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable +#Define gfx_tmds, 0: didn't support TMDS, 1: support +#Define gfx_compliance, 0: didn't support compliance, 1: support +#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration +#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 chip northbridge/amd/amdk8/root_complex device apic_cluster 0 on chip cpu/amd/socket_S1G1 -- http://www.hailfinger.org/ -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
