This one lets me boot my s2895 to Linux. The problem was that the AMD 8131 southbridge Makefile.inc depended on a typo and never got built.
This patch changes a few things that may be controversial, thanks for reviewing. src/Kconfig: Remove HT-specific options. src/cpu/amd/socket_F/Kconfig: Remove second occurrence of CPU_SOCKET_TYPE. src/mainboard/amd/serengeti_cheetah/Kconfig: Add HT_CHAIN_UNITID_BASE here, since it is board specific. src/mainboard/tyan/s289X/Kconfig: Fix typo and change APIC_ID_OFFSET to match old config. src/devices/Kconfig: Change default value of *_PLUGIN_SUPPORT to match old config. src/southbridge/amd/amd8131/Makefile.inc: Remove check since it was a typo, and the correct variable is checked in the parent directory. src/Makefile:Use devicetree.cb instead of Config.lb to generate static.c. Signed-off-by: Myles Watson <[email protected]> Thanks, Myles
Index: svn/src/Kconfig =================================================================== --- svn.orig/src/Kconfig +++ svn/src/Kconfig @@ -84,14 +84,6 @@ config PCI_ROM_RUN bool default n -config HT_CHAIN_UNITID_BASE - hex - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - config HEAP_SIZE hex default 0x2000 Index: svn/src/cpu/amd/socket_F/Kconfig =================================================================== --- svn.orig/src/cpu/amd/socket_F/Kconfig +++ svn/src/cpu/amd/socket_F/Kconfig @@ -24,8 +24,3 @@ config DIMM_SUPPORT default 0x0104 depends on CPU_AMD_SOCKET_F -config CPU_SOCKET_TYPE - hex - default 0x10 - depends on CPU_AMD_SOCKET_F - Index: svn/src/mainboard/amd/serengeti_cheetah/Kconfig =================================================================== --- svn.orig/src/mainboard/amd/serengeti_cheetah/Kconfig +++ svn/src/mainboard/amd/serengeti_cheetah/Kconfig @@ -119,6 +119,11 @@ config HT_CHAIN_END_UNITID_BASE default 0x6 depends on BOARD_AMD_SERENGETI_CHEETAH +config HT_CHAIN_UNITID_BASE + hex + default 0x1 + depends on BOARD_AMD_SERENGETI_CHEETAH + config USE_INIT bool default n Index: svn/src/mainboard/tyan/s2891/Kconfig =================================================================== --- svn.orig/src/mainboard/tyan/s2891/Kconfig +++ svn/src/mainboard/tyan/s2891/Kconfig @@ -17,7 +17,7 @@ config MAINBOARD_DIR config APIC_ID_OFFSET hex - default 8 + default 0x10 depends on BOARD_TYAN_S2891 config SB_HT_CHAIN_ON_BUS0 @@ -40,7 +40,7 @@ config MAINBOARD_PART_NUMBER default "s2891" depends on BOARD_TYAN_S2891 -config CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID hex default 0x2891 depends on BOARD_TYAN_S2891 Index: svn/src/mainboard/tyan/s2892/Kconfig =================================================================== --- svn.orig/src/mainboard/tyan/s2892/Kconfig +++ svn/src/mainboard/tyan/s2892/Kconfig @@ -17,7 +17,7 @@ config MAINBOARD_DIR config APIC_ID_OFFSET hex - default 8 + default 0x10 depends on BOARD_TYAN_S2892 config SB_HT_CHAIN_ON_BUS0 @@ -40,7 +40,7 @@ config MAINBOARD_PART_NUMBER default "s2892" depends on BOARD_TYAN_S2892 -config CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID hex default 0x2892 depends on BOARD_TYAN_S2892 Index: svn/src/mainboard/tyan/s2895/Kconfig =================================================================== --- svn.orig/src/mainboard/tyan/s2895/Kconfig +++ svn/src/mainboard/tyan/s2895/Kconfig @@ -17,7 +17,7 @@ config MAINBOARD_DIR config APIC_ID_OFFSET hex - default 8 + default 0x10 depends on BOARD_TYAN_S2895 config SB_HT_CHAIN_ON_BUS0 @@ -40,7 +40,7 @@ config MAINBOARD_PART_NUMBER default "s2895" depends on BOARD_TYAN_S2895 -config CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID hex default 0x2895 depends on BOARD_TYAN_S2895 Index: svn/src/devices/Kconfig =================================================================== --- svn.orig/src/devices/Kconfig +++ svn/src/devices/Kconfig @@ -79,20 +79,20 @@ config PCI_64BIT_PREF_MEM config HYPERTRANSPORT_PLUGIN_SUPPORT bool - default n + default y config PCIX_PLUGIN_SUPPORT bool - default n + default y config PCIEXP_PLUGIN_SUPPORT bool - default n + default y config AGP_PLUGIN_SUPPORT bool - default n + default y config CARDBUS_PLUGIN_SUPPORT bool - default n + default y Index: svn/src/southbridge/amd/amd8131/Makefile.inc =================================================================== --- svn.orig/src/southbridge/amd/amd8131/Makefile.inc +++ svn/src/southbridge/amd/amd8131/Makefile.inc @@ -1 +1 @@ -driver-$(SOUTHBRIDGE_AMD_AMD8131) += amd8131_bridge.o \ No newline at end of file +driver-y += amd8131_bridge.o Index: svn/Makefile =================================================================== --- svn.orig/Makefile +++ svn/Makefile @@ -111,7 +111,7 @@ $(obj)/mainboard/$(MAINBOARDDIR)/config. # needed objects that every mainboard uses # Creation of these is architecture and mainboard independent -$(obj)/mainboard/$(MAINBOARDDIR)/static.c: $(src)/mainboard/$(MAINBOARDDIR)/Config.lb $(obj)/mainboard/$(MAINBOARDDIR)/config.py +$(obj)/mainboard/$(MAINBOARDDIR)/static.c: $(src)/mainboard/$(MAINBOARDDIR)/devicetree.cb $(obj)/mainboard/$(MAINBOARDDIR)/config.py mkdir -p $(obj)/mainboard/$(MAINBOARDDIR) (cd $(obj)/mainboard/$(MAINBOARDDIR) ; PYTHONPATH=$(top)/util/sconfig export PYTHONPATH; python config.py $(MAINBOARDDIR) $(top) $(obj)/mainboard/$(MAINBOARDDIR))
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
