Hi, > From: Patrick Georgi [mailto:[email protected]] > Sent: Thursday, October 08, 2009 2:35 PM > To: Schwarz, Konrad > Cc: [email protected] > Subject: Re: [coreboot] Woriking configuration for AMD SimNow
> > The amd/serengeti_chedetah_fam10 board builds, but when run > the SimNow > > BSD "family10_1p.bsd" ultimately ends in a triple fault. (I > > configured the ROM device to have 1 MB with a starting address to > > match). I've included a screen shot of the VGA screen: > It seems you're using revision 4671, I fixed that particular > issue (or a > _very_ likely candidate) in r4697, so please update to at least that > revision. As you suspected, I was using 4671. I have now upgraded to 4742 through the qa.coreboot.org site; I was not able to get svn https: to work with our proxy server. > Please tell us if that fixes it. Unfortunately no. The simulation clock freezes after 7.33 (simulated) seconds but does not display a triple fault message. No VGA screen comes up. Konrad -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
