Hi,
20091008-4 is the usual "more kconfig" patch, but 20091008-3 is more
complex: It makes southbridge/amd/cs5535 build with the new build
system.
It only worked in the old one, because chip.h is commented out in the
Config.lb file (thanks Uwe for figuring that out). I simply added the
normal boiler plate to actually have this stuff do something, even if
it's just a printk (as southbridge_enable was already defined)
Signed-off-by: Patrick Georgi <[email protected]>
Index: src/southbridge/amd/cs5535/cs5535.c
===================================================================
--- src/southbridge/amd/cs5535/cs5535.c (Revision 4746)
+++ src/southbridge/amd/cs5535/cs5535.c (Arbeitskopie)
@@ -108,3 +108,11 @@
.vendor = PCI_VENDOR_ID_NS,
.device = PCI_DEVICE_ID_NS_CS5535
};
+
+struct chip_operations southbridge_amd_cs5535_ops = {
+ CHIP_NAME("AMD Geode CS5535 Southbridge")
+ /* This is only called when this device is listed in the
+ * static device tree.
+ */
+ .enable_dev = southbridge_enable,
+};
Index: src/southbridge/amd/cs5535/chip.h
===================================================================
--- src/southbridge/amd/cs5535/chip.h (Revision 4746)
+++ src/southbridge/amd/cs5535/chip.h (Arbeitskopie)
@@ -1,9 +1,9 @@
-#ifndef _SOUTHBRIDGE_AMD_CS5536
-#define _SOUTHBRIDGE_AMD_CS5536
+#ifndef _SOUTHBRIDGE_AMD_CS5535
+#define _SOUTHBRIDGE_AMD_CS5535
-extern struct chip_operations southbridge_amd_cs5536_ops;
+extern struct chip_operations southbridge_amd_cs5535_ops;
-struct southbridge_amd_cs5536_config {
+struct southbridge_amd_cs5535_config {
int none;
};
Index: src/mainboard/artecgroup/Kconfig
===================================================================
--- src/mainboard/artecgroup/Kconfig (Revision 4746)
+++ src/mainboard/artecgroup/Kconfig (Arbeitskopie)
@@ -1 +1,8 @@
-#
+choice
+ prompt "Mainboard model"
+ depends on VENDOR_ARTEC_GROUP
+
+source "src/mainboard/artecgroup/dbe61/Kconfig"
+
+endchoice
+
Index: src/mainboard/artecgroup/dbe61/Kconfig
===================================================================
--- src/mainboard/artecgroup/dbe61/Kconfig (Revision 0)
+++ src/mainboard/artecgroup/dbe61/Kconfig (Revision 0)
@@ -0,0 +1,47 @@
+config BOARD_ARTECGROUP_DBE61
+ bool "dbe61"
+ select ARCH_X86
+ select CPU_AMD_LX
+ select NORTHBRIDGE_AMD_LX
+ select SOUTHBRIDGE_AMD_CS5536
+ select HAVE_PIRQ_TABLE
+ select PIRQ_ROUTE
+ select UDELAY_TSC
+ select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+ select USE_DCACHE_RAM
+ select USE_PRINTK_IN_CAR
+
+config MAINBOARD_DIR
+ string
+ default artecgroup/dbe61
+ depends on BOARD_ARTECGROUP_DBE61
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "DBE61"
+ depends on BOARD_ARTECGROUP_DBE61
+
+config HAVE_OPTION_TABLE
+ bool
+ default n
+ depends on BOARD_ARTECGROUP_DBE61
+
+config IRQ_SLOT_COUNT
+ int
+ default 3
+ depends on BOARD_ARTECGROUP_DBE61
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xc8000
+ depends on BOARD_ARTECGROUP_DBE61
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x8000
+ depends on BOARD_ARTECGROUP_DBE61
+
+config RAMBASE
+ hex
+ default 0x4000
+ depends on BOARD_ARTECGROUP_DBE61
Index: src/mainboard/artecgroup/dbe61/Makefile.inc
===================================================================
--- src/mainboard/artecgroup/dbe61/Makefile.inc (Revision 0)
+++ src/mainboard/artecgroup/dbe61/Makefile.inc (Revision 0)
@@ -0,0 +1,31 @@
+driver-y += mainboard.o
+
+# Needed by irq_tables and mptable and acpi_tables.
+obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
+
+# This is part of the conversion to init-obj and away from included code.
+
+initobj-y += crt0.o
+# FIXME in $(top)/Makefile
+crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc
+crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc
+crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc
+crt0-y += ../../../../src/arch/i386/lib/id.inc
+crt0-y += ../../../../src/cpu/amd/model_lx/cache_as_ram.inc
+crt0-y += auto.inc
+
+ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb
+ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds
+ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds
+ldscript-y += ../../../../src/arch/i386/lib/id.lds
+ldscript-y += ../../../../src/arch/i386/lib/failover.lds
+
+ifdef POST_EVALUATION
+
+$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c $(obj)/option_table.h
+ $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c -o $@
+ perl -e 's/\.rodata/.rom.data/g' -pi $@
+ perl -e 's/\.text/.section .rom.text/g' -pi $@
+
+endif
+
Index: src/mainboard/lippert/roadrunner-lx/Kconfig
===================================================================
--- src/mainboard/lippert/roadrunner-lx/Kconfig (Revision 0)
+++ src/mainboard/lippert/roadrunner-lx/Kconfig (Revision 0)
@@ -0,0 +1,48 @@
+config BOARD_LIPPERT_ROADRUNNER_LX
+ bool "RoadRunner-LX"
+ select ARCH_X86
+ select CPU_AMD_LX
+ select NORTHBRIDGE_AMD_LX
+ select SOUTHBRIDGE_AMD_CS5536
+ select SUPERIO_ITE_IT8712F
+ select HAVE_PIRQ_TABLE
+ select PIRQ_ROUTE
+ select UDELAY_TSC
+ select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+ select USE_DCACHE_RAM
+ select USE_PRINTK_IN_CAR
+
+config MAINBOARD_DIR
+ string
+ default lippert/roadrunner-lx
+ depends on BOARD_LIPPERT_ROADRUNNER_LX
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "ROADRUNNERLX"
+ depends on BOARD_LIPPERT_ROADRUNNER_LX
+
+config HAVE_OPTION_TABLE
+ bool
+ default n
+ depends on BOARD_LIPPERT_ROADRUNNER_LX
+
+config IRQ_SLOT_COUNT
+ int
+ default 7
+ depends on BOARD_LIPPERT_ROADRUNNER_LX
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xc8000
+ depends on BOARD_LIPPERT_ROADRUNNER_LX
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x8000
+ depends on BOARD_LIPPERT_ROADRUNNER_LX
+
+config RAMBASE
+ hex
+ default 0x4000
+ depends on BOARD_LIPPERT_ROADRUNNER_LX
Index: src/mainboard/lippert/roadrunner-lx/Makefile.inc
===================================================================
--- src/mainboard/lippert/roadrunner-lx/Makefile.inc (Revision 0)
+++ src/mainboard/lippert/roadrunner-lx/Makefile.inc (Revision 0)
@@ -0,0 +1,31 @@
+driver-y += mainboard.o
+
+# Needed by irq_tables and mptable and acpi_tables.
+obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
+
+# This is part of the conversion to init-obj and away from included code.
+
+initobj-y += crt0.o
+# FIXME in $(top)/Makefile
+crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc
+crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc
+crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc
+crt0-y += ../../../../src/arch/i386/lib/id.inc
+crt0-y += ../../../../src/cpu/amd/model_lx/cache_as_ram.inc
+crt0-y += auto.inc
+
+ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb
+ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds
+ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds
+ldscript-y += ../../../../src/arch/i386/lib/id.lds
+ldscript-y += ../../../../src/arch/i386/lib/failover.lds
+
+ifdef POST_EVALUATION
+
+$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c
+ $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c -o $@
+ perl -e 's/\.rodata/.rom.data/g' -pi $@
+ perl -e 's/\.text/.section .rom.text/g' -pi $@
+
+endif
+
Index: src/mainboard/lippert/Kconfig
===================================================================
--- src/mainboard/lippert/Kconfig (Revision 4746)
+++ src/mainboard/lippert/Kconfig (Arbeitskopie)
@@ -1 +1,10 @@
-#
+choice
+ prompt "Mainboard model"
+ depends on VENDOR_LIPPERT
+
+source "src/mainboard/lippert/frontrunner/Kconfig"
+source "src/mainboard/lippert/roadrunner-lx/Kconfig"
+source "src/mainboard/lippert/spacerunner-lx/Kconfig"
+
+endchoice
+
Index: src/mainboard/lippert/frontrunner/Kconfig
===================================================================
--- src/mainboard/lippert/frontrunner/Kconfig (Revision 0)
+++ src/mainboard/lippert/frontrunner/Kconfig (Revision 0)
@@ -0,0 +1,34 @@
+config BOARD_LIPPERT_FRONTRUNNER
+ bool "Frontrunner"
+ select ARCH_X86
+ select CPU_AMD_GX2
+ select NORTHBRIDGE_AMD_GX2
+ select SOUTHBRIDGE_AMD_CS5535
+ select UDELAY_TSC
+ select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+ select HAVE_PIRQ_TABLE
+
+config MAINBOARD_DIR
+ string
+ default lippert/frontrunner
+ depends on BOARD_LIPPERT_FRONTRUNNER
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "Frontrunner"
+ depends on BOARD_LIPPERT_FRONTRUNNER
+
+config HAVE_OPTION_TABLE
+ bool
+ default n
+ depends on BOARD_LIPPERT_FRONTRUNNER
+
+config IRQ_SLOT_COUNT
+ int
+ default 2
+ depends on BOARD_LIPPERT_FRONTRUNNER
+
+config USE_INIT
+ bool
+ default n
+ depends on BOARD_LIPPERT_FRONTRUNNER
Index: src/mainboard/lippert/frontrunner/Makefile.inc
===================================================================
--- src/mainboard/lippert/frontrunner/Makefile.inc (Revision 0)
+++ src/mainboard/lippert/frontrunner/Makefile.inc (Revision 0)
@@ -0,0 +1,2 @@
+ROMCCFLAGS=-mcpu=i386 -O
+include $(src)/mainboard/Makefile.romccboard.inc
Index: src/mainboard/lippert/spacerunner-lx/Kconfig
===================================================================
--- src/mainboard/lippert/spacerunner-lx/Kconfig (Revision 0)
+++ src/mainboard/lippert/spacerunner-lx/Kconfig (Revision 0)
@@ -0,0 +1,48 @@
+config BOARD_LIPPERT_SPACERUNNER_LX
+ bool "SpaceRunner-LX"
+ select ARCH_X86
+ select CPU_AMD_LX
+ select NORTHBRIDGE_AMD_LX
+ select SOUTHBRIDGE_AMD_CS5536
+ select SUPERIO_ITE_IT8712F
+ select HAVE_PIRQ_TABLE
+ select PIRQ_ROUTE
+ select UDELAY_TSC
+ select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+ select USE_DCACHE_RAM
+ select USE_PRINTK_IN_CAR
+
+config MAINBOARD_DIR
+ string
+ default lippert/spacerunner-lx
+ depends on BOARD_LIPPERT_SPACERUNNER_LX
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "SPACERUNNERLX"
+ depends on BOARD_LIPPERT_SPACERUNNER_LX
+
+config HAVE_OPTION_TABLE
+ bool
+ default n
+ depends on BOARD_LIPPERT_SPACERUNNER_LX
+
+config IRQ_SLOT_COUNT
+ int
+ default 7
+ depends on BOARD_LIPPERT_SPACERUNNER_LX
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xc8000
+ depends on BOARD_LIPPERT_SPACERUNNER_LX
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x8000
+ depends on BOARD_LIPPERT_SPACERUNNER_LX
+
+config RAMBASE
+ hex
+ default 0x4000
+ depends on BOARD_LIPPERT_SPACERUNNER_LX
Index: src/mainboard/lippert/spacerunner-lx/Makefile.inc
===================================================================
--- src/mainboard/lippert/spacerunner-lx/Makefile.inc (Revision 0)
+++ src/mainboard/lippert/spacerunner-lx/Makefile.inc (Revision 0)
@@ -0,0 +1,31 @@
+driver-y += mainboard.o
+
+# Needed by irq_tables and mptable and acpi_tables.
+obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
+
+# This is part of the conversion to init-obj and away from included code.
+
+initobj-y += crt0.o
+# FIXME in $(top)/Makefile
+crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc
+crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc
+crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc
+crt0-y += ../../../../src/arch/i386/lib/id.inc
+crt0-y += ../../../../src/cpu/amd/model_lx/cache_as_ram.inc
+crt0-y += auto.inc
+
+ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb
+ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds
+ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds
+ldscript-y += ../../../../src/arch/i386/lib/id.lds
+ldscript-y += ../../../../src/arch/i386/lib/failover.lds
+
+ifdef POST_EVALUATION
+
+$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c
+ $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c -o $@
+ perl -e 's/\.rodata/.rom.data/g' -pi $@
+ perl -e 's/\.text/.section .rom.text/g' -pi $@
+
+endif
+
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
