See patch.
Uwe. -- http://www.hermann-uwe.de | http://www.randomprojects.org http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
Add kconfig menus for most chipset VIDEO_MB values. VIDEO_MB is a variable that defines how many MB of RAM will be used for onboard graphics frame buffer. It's northbridge-dependent which values for CONFIG_MB are valid (but not board-dependent). This patch adds choices for menuconfig to select the VIDEO_MB value for: - Intel 82810 - Intel 82830 - VIA CN400 - VIA CN700 Note: CN400 and CN700 are based on the CX700 datasheet, not sure if they're correct. If somebody has CN400 and CN700 datasheets, please verify. We drop all per-board VIDEO_MB variables in per-board Kconfig files as there's a northbridge-specific option/default now (plus the user can override the value if needed in menuconfig). As CONFIG_MB is chipset-specific but not board-specific (and never was), filter it in util/compareboard/compareboard, we don't need to match those values. Finally, put "CPU", "Northbridge", "Southbridge", "Super I/O", and "Miscellaneous" sections into the "Devices" menu, where NB-specific options will appear if you select a board using a certain NB, SB-specific options would appear in the "Southbridge" section etc. Signed-off-by: Uwe Hermann <[email protected]> Index: src/Kconfig =================================================================== --- src/Kconfig (Revision 4863) +++ src/Kconfig (Arbeitskopie) @@ -52,12 +52,22 @@ source src/mainboard/Kconfig source src/arch/i386/Kconfig source src/arch/ppc/Kconfig + +menu "Devices" + +comment "CPU" +source src/cpu/Kconfig +comment "Northbridge" source src/northbridge/Kconfig -source src/devices/Kconfig +comment "Southbridge" source src/southbridge/Kconfig +comment "Super I/O" source src/superio/Kconfig -source src/cpu/Kconfig +comment "Miscellaneous" +source src/devices/Kconfig +endmenu + config PCI_BUS_SEGN_BITS int default 0 @@ -211,9 +221,10 @@ bool default n +# TODO: Can probably be removed once all chipsets have kconfig options for it. config VIDEO_MB + int default 0 - int config USE_WATCHDOG_ON_BOOT bool Index: src/devices/Kconfig =================================================================== --- src/devices/Kconfig (Revision 4863) +++ src/devices/Kconfig (Arbeitskopie) @@ -18,8 +18,6 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -menu "Devices" - config VGA_BRIDGE_SETUP bool "Setup bridges on path to VGA adapter" default y @@ -82,8 +80,6 @@ help See debug.h for values 0 is no debug output, 0x31ff is _verbose_. -endmenu - config CONSOLE_VGA_MULTI bool default n Index: src/mainboard/bcom/winnetp680/Kconfig =================================================================== --- src/mainboard/bcom/winnetp680/Kconfig (Revision 4863) +++ src/mainboard/bcom/winnetp680/Kconfig (Arbeitskopie) @@ -25,11 +25,6 @@ default 10 depends on BOARD_BCOM_WINNETP680 -config VIDEO_MB - int - default 32 - depends on BOARD_BCOM_WINNETP680 - config RAMBASE hex default 0x4000 Index: src/mainboard/thomson/ip1000/Kconfig =================================================================== --- src/mainboard/thomson/ip1000/Kconfig (Revision 4863) +++ src/mainboard/thomson/ip1000/Kconfig (Arbeitskopie) @@ -29,8 +29,3 @@ default 7 depends on BOARD_THOMSON_IP1000 -config VIDEO_MB - int - default 0 - depends on BOARD_THOMSON_IP1000 - Index: src/mainboard/kontron/kt690/Kconfig =================================================================== --- src/mainboard/kontron/kt690/Kconfig (Revision 4863) +++ src/mainboard/kontron/kt690/Kconfig (Arbeitskopie) @@ -44,11 +44,6 @@ default 0x0 depends on BOARD_KONTRON_KT690 -config VIDEO_MB - int - default 1 - depends on BOARD_KONTRON_KT690 - config LB_CKS_RANGE_END int default 122 Index: src/mainboard/mitac/6513wu/Kconfig =================================================================== --- src/mainboard/mitac/6513wu/Kconfig (Revision 4863) +++ src/mainboard/mitac/6513wu/Kconfig (Arbeitskopie) @@ -50,8 +50,3 @@ default 8 depends on BOARD_MITAC_6513WU -config VIDEO_MB - int - default 1 - depends on BOARD_MITAC_6513WU - Index: src/mainboard/nec/powermate2000/Kconfig =================================================================== --- src/mainboard/nec/powermate2000/Kconfig (Revision 4863) +++ src/mainboard/nec/powermate2000/Kconfig (Arbeitskopie) @@ -50,8 +50,3 @@ default 5 depends on BOARD_NEC_POWERMATE_2000 -config VIDEO_MB - int - default 1 - depends on BOARD_NEC_POWERMATE_2000 - Index: src/mainboard/rca/rm4100/Kconfig =================================================================== --- src/mainboard/rca/rm4100/Kconfig (Revision 4863) +++ src/mainboard/rca/rm4100/Kconfig (Arbeitskopie) @@ -30,8 +30,3 @@ default 7 depends on BOARD_RCA_RM4100 -config VIDEO_MB - int - default 0 - depends on BOARD_RCA_RM4100 - Index: src/mainboard/hp/e_vectra_p2706t/Kconfig =================================================================== --- src/mainboard/hp/e_vectra_p2706t/Kconfig (Revision 4863) +++ src/mainboard/hp/e_vectra_p2706t/Kconfig (Arbeitskopie) @@ -53,8 +53,3 @@ default 3 depends on BOARD_HP_E_VECTRA_P2706T -config VIDEO_MB - int - default 1 - depends on BOARD_HP_E_VECTRA_P2706T - Index: src/mainboard/via/epia-m700/Kconfig =================================================================== --- src/mainboard/via/epia-m700/Kconfig (Revision 4863) +++ src/mainboard/via/epia-m700/Kconfig (Arbeitskopie) @@ -27,11 +27,6 @@ default "EPIA-M700" depends on BOARD_VIA_EPIA_M700 -config VIDEO_MB - int - default 64 - depends on BOARD_VIA_EPIA_M700 - config RAMBASE hex default 0x4000 Index: src/mainboard/via/epia-n/Kconfig =================================================================== --- src/mainboard/via/epia-n/Kconfig (Revision 4863) +++ src/mainboard/via/epia-n/Kconfig (Arbeitskopie) @@ -31,11 +31,6 @@ default "EPIA-N" depends on BOARD_VIA_EPIA_N -config VIDEO_MB - int - default 32 - depends on BOARD_VIA_EPIA_N - config RAMBASE hex default 0x4000 Index: src/mainboard/via/epia-cn/Kconfig =================================================================== --- src/mainboard/via/epia-cn/Kconfig (Revision 4863) +++ src/mainboard/via/epia-cn/Kconfig (Arbeitskopie) @@ -28,11 +28,6 @@ default "EPIA-CN" depends on BOARD_VIA_EPIA_CN -config VIDEO_MB - int - default 32 - depends on BOARD_VIA_EPIA_CN - config RAMBASE hex default 0x4000 Index: src/mainboard/via/pc2500e/Kconfig =================================================================== --- src/mainboard/via/pc2500e/Kconfig (Revision 4863) +++ src/mainboard/via/pc2500e/Kconfig (Arbeitskopie) @@ -22,11 +22,6 @@ default "pc2500e" depends on BOARD_VIA_PC2500E -config VIDEO_MB - int - default 32 - depends on BOARD_VIA_PC2500E - config RAMBASE hex default 0x4000 Index: src/mainboard/msi/ms6178/Kconfig =================================================================== --- src/mainboard/msi/ms6178/Kconfig (Revision 4863) +++ src/mainboard/msi/ms6178/Kconfig (Arbeitskopie) @@ -49,8 +49,3 @@ default 4 depends on BOARD_MSI_MS_6178 -config VIDEO_MB - int - default 1 - depends on BOARD_MSI_MS_6178 - Index: src/mainboard/jetway/j7f24/Kconfig =================================================================== --- src/mainboard/jetway/j7f24/Kconfig (Revision 4863) +++ src/mainboard/jetway/j7f24/Kconfig (Arbeitskopie) @@ -29,11 +29,6 @@ default "J7f24" depends on BOARD_JETWAY_J7F24 -config VIDEO_MB - int - default 32 - depends on BOARD_JETWAY_J7F24 - config RAMBASE hex default 0x4000 Index: src/mainboard/technexion/tim5690/Kconfig =================================================================== --- src/mainboard/technexion/tim5690/Kconfig (Revision 4863) +++ src/mainboard/technexion/tim5690/Kconfig (Arbeitskopie) @@ -129,11 +129,6 @@ default 0x4000 depends on BOARD_TECHNEXION_TIM5690 -config VIDEO_MB - int - default 1 - depends on BOARD_TECHNEXION_TIM5690 - config HAVE_OPTION_TABLE bool default n Index: src/mainboard/asus/mew-am/Kconfig =================================================================== --- src/mainboard/asus/mew-am/Kconfig (Revision 4863) +++ src/mainboard/asus/mew-am/Kconfig (Arbeitskopie) @@ -50,8 +50,3 @@ default 8 depends on BOARD_ASUS_MEW_AM -config VIDEO_MB - int - default 1 - depends on BOARD_ASUS_MEW_AM - Index: src/mainboard/asus/mew-vm/Kconfig =================================================================== --- src/mainboard/asus/mew-vm/Kconfig (Revision 4863) +++ src/mainboard/asus/mew-vm/Kconfig (Arbeitskopie) @@ -45,8 +45,3 @@ default 11 depends on BOARD_ASUS_MEW_VM -config VIDEO_MB - int - default 1 - depends on BOARD_ASUS_MEW_VM - Index: src/northbridge/via/cn400/Kconfig =================================================================== --- src/northbridge/via/cn400/Kconfig (Revision 4863) +++ src/northbridge/via/cn400/Kconfig (Arbeitskopie) @@ -17,3 +17,36 @@ default n depends on NORTHBRIDGE_VIA_CN400 +# TODO: Values are from the CX700 datasheet, not sure if this matches CN400. +# TODO: What should be the per-chipset default value here? +choice + prompt "Onboard graphics" + default CN400_VIDEO_MB_32MB + depends on NORTHBRIDGE_VIA_CN400 + +# TODO: Disabling onboard graphics is not yet supported in the source code. +config CN400_VIDEO_MB_OFF + bool "Disabled, 0KB" +config CN400_VIDEO_MB_8MB + bool "Enabled, 8MB" +config CN400_VIDEO_MB_16MB + bool "Enabled, 16MB" +config CN400_VIDEO_MB_32MB + bool "Enabled, 32MB" +config CN400_VIDEO_MB_64MB + bool "Enabled, 64MB" +config CN400_VIDEO_MB_128MB + bool "Enabled, 128MB" + +endchoice + +config VIDEO_MB + int + default 0 if CN400_VIDEO_MB_OFF + default 8 if CN400_VIDEO_MB_8MB + default 16 if CN400_VIDEO_MB_16MB + default 32 if CN400_VIDEO_MB_32MB + default 64 if CN400_VIDEO_MB_64MB + default 128 if CN400_VIDEO_MB_128MB + depends on NORTHBRIDGE_VIA_CN400 + Index: src/northbridge/via/cn700/Kconfig =================================================================== --- src/northbridge/via/cn700/Kconfig (Revision 4863) +++ src/northbridge/via/cn700/Kconfig (Arbeitskopie) @@ -17,3 +17,37 @@ bool default n depends on NORTHBRIDGE_VIA_CN700 + +# TODO: Values are from the CX700 datasheet, not sure if this matches CN700. +# TODO: What should be the per-chipset default value here? +choice + prompt "Onboard graphics" + default CN700_VIDEO_MB_32MB + depends on NORTHBRIDGE_VIA_CN700 + +# TODO: Disabling onboard graphics is not yet supported in the code. +config CN700_VIDEO_MB_OFF + bool "Disabled, 0KB" +config CN700_VIDEO_MB_8MB + bool "Enabled, 8MB" +config CN700_VIDEO_MB_16MB + bool "Enabled, 16MB" +config CN700_VIDEO_MB_32MB + bool "Enabled, 32MB" +config CN700_VIDEO_MB_64MB + bool "Enabled, 64MB" +config CN700_VIDEO_MB_128MB + bool "Enabled, 128MB" + +endchoice + +config VIDEO_MB + int + default 0 if CN700_VIDEO_MB_OFF + default 8 if CN700_VIDEO_MB_8MB + default 16 if CN700_VIDEO_MB_16MB + default 32 if CN700_VIDEO_MB_32MB + default 64 if CN700_VIDEO_MB_64MB + default 128 if CN700_VIDEO_MB_128MB + depends on NORTHBRIDGE_VIA_CN700 + Index: src/northbridge/intel/i82810/Kconfig =================================================================== --- src/northbridge/intel/i82810/Kconfig (Revision 4863) +++ src/northbridge/intel/i82810/Kconfig (Arbeitskopie) @@ -22,3 +22,24 @@ bool select HAVE_HIGH_TABLES +choice + prompt "Onboard graphics" + default I810_VIDEO_MB_1MB + depends on NORTHBRIDGE_INTEL_I82810 + +config I810_VIDEO_MB_OFF + bool "Disabled, 0KB" +config I810_VIDEO_MB_512KB + bool "Enabled, 512KB" +config I810_VIDEO_MB_1MB + bool "Enabled, 1MB" + +endchoice + +config VIDEO_MB + int + default 0 if I810_VIDEO_MB_OFF + default 512 if I810_VIDEO_MB_512KB + default 1 if I810_VIDEO_MB_1MB + depends on NORTHBRIDGE_INTEL_I82810 + Index: src/northbridge/intel/i82830/Kconfig =================================================================== --- src/northbridge/intel/i82830/Kconfig (Revision 4863) +++ src/northbridge/intel/i82830/Kconfig (Arbeitskopie) @@ -2,3 +2,27 @@ bool select HAVE_HIGH_TABLES +choice + prompt "Onboard graphics" + default I830_VIDEO_MB_8MB + depends on NORTHBRIDGE_INTEL_I82830 + +config I830_VIDEO_MB_OFF + bool "Disabled, 0KB" +config I830_VIDEO_MB_512KB + bool "Enabled, 512KB" +config I830_VIDEO_MB_1MB + bool "Enabled, 1MB" +config I830_VIDEO_MB_8MB + bool "Enabled, 8MB" + +endchoice + +config VIDEO_MB + int + default 0 if I830_VIDEO_MB_OFF + default 512 if I830_VIDEO_MB_512KB + default 1 if I830_VIDEO_MB_1MB + default 8 if I830_VIDEO_MB_8MB + depends on NORTHBRIDGE_INTEL_I82830 + Index: util/compareboard/compareboard =================================================================== --- util/compareboard/compareboard (Revision 4863) +++ util/compareboard/compareboard (Arbeitskopie) @@ -44,6 +44,7 @@ -e "/^CONFIG_ROM_IMAGE_SIZE / d" \ -e "/^CONFIG_STACK_SIZE / d" \ -e "/^CONFIG_GDB_STUB / d" \ + -e "/^CONFIG_VIDEO_MB / d" \ $A/old > $A/old.filtered sed \ -e "/^CONFIG_VENDOR_/ d" \ @@ -67,6 +68,7 @@ -e "/^CONFIG_ROM_IMAGE_SIZE / d" \ -e "/^CONFIG_STACK_SIZE / d" \ -e "/^CONFIG_GDB_STUB / d" \ + -e "/^CONFIG_VIDEO_MB / d" \ $A/new > $A/new.filtered normalize $A/old.filtered > $A/old.normalized
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot

