[email protected] wrote: > Are there some hard numbers for coreboot initialization and > bootloader payload time (from power-up/reset to the start of the OS > kernel load)?
About a year and a half ago I did some numbers on ALIX.1C which is a Geode LX800 board. I was using Linux 2.6 as payload. coreboot v3 ran for some 600ms until Linux start, but there was some discussion that there was a bit of "invisible" code running before I started measuring, which could run up to a few 100ms, because I timed the serial output rather than the system reset signal. //Peter -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
