On Thu, Dec 3, 2009 at 3:14 PM, Myles Watson <[email protected]> wrote: > >> I just built coreboot from SVN using the kconfig system for my ASUS >> A8V-E SE. However, I never get anything after the "now booting... >> fallback" message on the serial port. Also, the hard drive activity >> light stays on solid. >> >> I had coreboot working fine on this exact board over a year ago. Then, >> I had to use the manual build method. Back then, even when the video >> card didn't initialize, I got a lot more output on the serial port. >> >> What should I try next? Do I still need to use the manual build method >> for this board? > It looks like there are quite a few differences between the old build's > CONFIG_* settings and Kconfig's settings. Does the old way still work for > you with the latest svn? If so, we can fix Kconfig to match and try that. Here's the patch that makes most of the important things match. There's really no good reason to go back to the old way of building. Let's just fix what we're using.
Signed-off-by: Myles Watson <[email protected]> Thanks, Myles
Index: svn/src/mainboard/asus/a8v-e_se/Kconfig =================================================================== --- svn.orig/src/mainboard/asus/a8v-e_se/Kconfig +++ svn/src/mainboard/asus/a8v-e_se/Kconfig @@ -2,13 +2,13 @@ config BOARD_ASUS_A8V_E_SE bool "A8V-E SE" select ARCH_X86 select CPU_AMD_SOCKET_939 + select K8_HT_FREQ_1G_SUPPORT select NORTHBRIDGE_AMD_AMDK8 select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX select SOUTHBRIDGE_VIA_VT8237R select SUPERIO_WINBOND_W83627EHG select USE_PRINTK_IN_CAR select USE_DCACHE_RAM - select HAVE_HARD_RESET select IOAPIC select HAVE_ACPI_TABLES select HAVE_MP_TABLE @@ -41,7 +41,7 @@ config APIC_ID_OFFSET config SB_HT_CHAIN_ON_BUS0 int - default 2 + default 1 depends on BOARD_ASUS_A8V_E_SE config SB_HT_CHAIN_UNITID_OFFSET_ONLY @@ -66,7 +66,7 @@ config MAINBOARD_PART_NUMBER config HW_MEM_HOLE_SIZEK hex - default 0x100000 + default 0 depends on BOARD_ASUS_A8V_E_SE config MAX_CPUS @@ -81,7 +81,7 @@ config MAX_PHYSICAL_CPUS config HT_CHAIN_END_UNITID_BASE hex - default 0x0 + default 0x20 depends on BOARD_ASUS_A8V_E_SE config HT_CHAIN_UNITID_BASE @@ -94,9 +94,9 @@ config USE_INIT default n depends on BOARD_ASUS_A8V_E_SE -config SB_HT_CHAIN_ON_BUS0 - int - default 2 +config HAVE_OPTION_TABLE + bool + default n depends on BOARD_ASUS_A8V_E_SE config IRQ_SLOT_COUNT
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
