On Mon, Dec 28, 2009 at 1:55 PM, <[email protected]> wrote:
> Hello Rudolf,
>
> You are right. It works with your patch using buildtarget instead of
> kconfig.
> But now, I'm back to the first problem I found: when using kconfig, S3
> resume doesn't work and when using buildtarget, I can't boot opensuse
> because I get the error: initrd is too big.
>
This patch should get you most of the way to buildtarget using Kconfig. It
minimizes the differences that are found by running
util/kbuildall/kbuildall asus/m2v-mx_se
Thanks,
Myles
Index: src/mainboard/asus/m2v-mx_se/Kconfig
===================================================================
--- src/mainboard/asus/m2v-mx_se/Kconfig (revision 4993)
+++ src/mainboard/asus/m2v-mx_se/Kconfig (working copy)
@@ -33,6 +33,8 @@
select IOAPIC
select HAVE_OPTION_TABLE
select HAVE_ACPI_TABLES
+ select HAVE_ACPI_RESUME
+ select HAVE_MAINBOARD_RESOURCES
select BOARD_ROMSIZE_KB_512
select VGA
@@ -41,6 +43,16 @@
default asus/m2v-mx_se
depends on BOARD_ASUS_M2V_MX_SE
+config RAMBASE
+ hex
+ default 0x1F00000
+ depends on BOARD_ASUS_M2V_MX_SE
+
+config RAMTOP
+ hex
+ default 0x2000000
+ depends on BOARD_ASUS_M2V_MX_SE
+
config DCACHE_RAM_BASE
hex
default 0xcc000
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
