Patrick Georgi escribió: > Am 25.01.2010 17:13, schrieb Knut Kujat: > >> Hi, >> I would love to send the new board to the list but there are several >> issues still remaining like: >> - SMBus gets irq 0 instead of 5 >> - ACPI not working >> >> > We have lots of boards with (at best) incomplete ACPI support. That > shouldn't stop you from releasing :-) > >> - booting interrupts for about 4 minutes on "Stage: loading >> fallback/coreboot_ram @ 0x200000 (360448 bytes), entry @ 0x200000" >> >> > You could try to dump the MTRRs right before loading the ramstage. 4 > minutes sounds like there's some problem with caching. > >> and the strangest thing: I created a new folder h8qme_fam10 (I was >> working in h8dmr_fam10 all the time) made the different changes to be >> able to compile everything correctly and now it refuses to boot. It just >> halts somewhere or does several soft resets at different places. >> >> > Did you check that there is no h8dmr_fam10 or H8DMR_FAM10 in the new > directory? Is that directory hooked up in kconfig (if you're using > kconfig, that is)? > If you mix up the names, it might just build a mix of code for your > board and another supermicro board. > > > Patrick I was very careful with not mixing names. I tried to just rename the existing folder as well with the same result, it's just so annoying because I know I must be forgetting something really stupid.
thx, Knut Kujat. -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
