Unfortunately, I do not have a single board with the original vendor
bios. These nodes were all flashed with LinuxBios a long time ago. I
was trying to upgrading them to a newer version so I could use gpxe.
Does anyone have this information? Thanks.
--
Hugh Greenberg
On 02/02/2010 01:18 AM, Knut Kujat wrote:
Hi,
I used to have the same problems with mptable but because my entrance in
mptable for my network devices weren't correct so they never got an irq
assigned. Could you send in a lspci -vvv (with vendor bios) and the
lines from mptable where you assign irq to your network device(s?)?
Thanks,
Knut Kujat.
Hugh Greenberg escribió:
They look correct to me, but I don't know exactly what to look for. I
checked the irq tables and they were correct. I checked the mptable
and tried change things, but nothing helped. Linux ernels>= 2.6.30
do not permit my pci devices to work correctly. Kernels older than
that seem to work. Attached is the output from coreboot and from Linux.
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
