Author: ward Date: Thu Feb 4 04:03:39 2010 New Revision: 5083 URL: http://tracker.coreboot.org/trac/coreboot/changeset/5083
Log: Revision 5051 broke Kconfig booting for the Tyan s2881 board. Up to 5050, there were two SB_HT_CHAIN_ON_BUS0 sections in the mainboard Kconfig file - one setting the parameter to 0, the other setting it to 2. Revision 5051 removed one of the two SB_HT_CHAIN_ON_BUS0 sections - the wrong one. This patch fixes that. Revision 5051 removed the wrong setting because newconfig for this board was *also* wrong. This patch fixes that too. Tested on real hardware, both with Kconfig and newconfig. Signed-off-by: Ward Vandewege <[email protected]> Acked-by: Patrick Georgi <[email protected]> Acked-by: Stefan Reinauer <[email protected]> Modified: trunk/src/mainboard/tyan/s2881/Kconfig trunk/src/mainboard/tyan/s2881/Options.lb Modified: trunk/src/mainboard/tyan/s2881/Kconfig ============================================================================== --- trunk/src/mainboard/tyan/s2881/Kconfig Thu Feb 4 02:32:43 2010 (r5082) +++ trunk/src/mainboard/tyan/s2881/Kconfig Thu Feb 4 04:03:39 2010 (r5083) @@ -24,7 +24,7 @@ config SB_HT_CHAIN_ON_BUS0 int - default 0 + default 2 depends on BOARD_TYAN_S2881 config LB_CKS_RANGE_END Modified: trunk/src/mainboard/tyan/s2881/Options.lb ============================================================================== --- trunk/src/mainboard/tyan/s2881/Options.lb Thu Feb 4 02:32:43 2010 (r5082) +++ trunk/src/mainboard/tyan/s2881/Options.lb Thu Feb 4 04:03:39 2010 (r5083) @@ -128,7 +128,7 @@ default CONFIG_HT_CHAIN_END_UNITID_BASE=0x06 #make the SB HT chain on bus 0, default is not (0) -default CONFIG_SB_HT_CHAIN_ON_BUS0=0 +default CONFIG_SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) #default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
