hi Jordan,
Do you have any document talking about how to write a BAYOU xml file,where to
get it?
Or, can you tell me where is wrong in the bayou.xml at below?
Many thanks.
I have a bios.bin.elf(seabios binary file) and coreinfo.elf included in my
bayou.elf, so a bayou.xml is written based on bayou.xml.example, but BAYOU
fails to parse it at run time:
The serial output has some messy code, and the screen output only have "default
chain" and "y"(keyboard can be used to choose, but pressing [return] has no
response).
Here are the details info:
-------------bayou.xml.example------------- -------------my
bayou.xml-------------
<BayouConfig> <BayouConfig>
<global> <global>
<timeout>10</timeout> <timeout>10</timeout>
</global> </global>
<payloads> <payloads>
<payload type="chain" flags="default"> <payload type="chain"
flags="default">
<title>Default Chain</title> <title>Default Chain</title>
<chain> <chain>
<file>payloads/passwd.elf</file>
<file>bios.bin.elf</file>
<lar>passwd</lar> </chain>
</chain> <chain>
<chain>
<file>coreinfo.elf</file>
<file>payloads/coreinfo.elf</file> </chain>
</chain> </payload>
</payload> <payload type="chooser">
<payload type="chooser">
<file>coreinfo.elf</file>
<file>payloads/coreinfo.elf</file> </payload>
</payload> </payloads>
</payloads> </BayouConfig>
</BayouConfig>
---------serial ouput of my bayou.xml------ ------------screen ouput of my
bayou.xml ------
<-[H<-[JBayou Payload Chooser v0.3 --------payload chooser--------
Press ESC for the menu (10)... | |
Press ESC for the menu ( 9)... | default chain |
Press ESC for the menu ( 8)... | y |
-------------------------------
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
