Author: stepan Date: Wed Apr 14 09:47:07 2010 New Revision: 5423 URL: https://tracker.coreboot.org/trac/coreboot/changeset/5423
Log: move cpu/x86/car to cpu/intel/car as previously discussed on the mailing list. this patch also slightly changes it so we have a single cache_as_ram.inc which requires no "help" from cache_as_ram_post.c and cache_as_ram_disable.c (or worse, a lot of cruft hacked right into romstage.c like on tyan s2735) Now all CAR code except the AMD Opteron/Athlon64 CAR code follows the new simpler scheme. I'll gladly leave src/cpu/amd/car to someone else ;-) Signed-off-by: Stefan Reinauer <[email protected]> Acked-by: Stefan Reinauer <[email protected]> Added: trunk/src/cpu/intel/car/ - copied from r5413, trunk/src/cpu/x86/car/ Deleted: trunk/src/cpu/intel/car/cache_as_ram_post.c trunk/src/cpu/intel/model_6bx/cache_as_ram_disable.c trunk/src/cpu/x86/car/ Modified: trunk/src/arch/i386/Makefile.inc trunk/src/cpu/intel/car/cache_as_ram.inc trunk/src/cpu/intel/socket_mFCBGA479/Makefile.inc trunk/src/mainboard/rca/rm4100/romstage.c trunk/src/mainboard/thomson/ip1000/romstage.c trunk/src/mainboard/tyan/s2735/romstage.c trunk/src/northbridge/via/vx800/examples/romstage.c Modified: trunk/src/arch/i386/Makefile.inc ============================================================================== --- trunk/src/arch/i386/Makefile.inc Tue Apr 13 23:31:42 2010 (r5422) +++ trunk/src/arch/i386/Makefile.inc Wed Apr 14 09:47:07 2010 (r5423) @@ -127,7 +127,7 @@ # FIXME move to CPU_INTEL_SOCKET_MPGA604 # ifeq ($(CONFIG_BOARD_TYAN_S2735),y) -crt0s += $(src)/cpu/x86/car/cache_as_ram.inc +crt0s += $(src)/cpu/intel/car/cache_as_ram.inc endif ifeq ($(CONFIG_LLSHELL),y) Modified: trunk/src/cpu/intel/car/cache_as_ram.inc ============================================================================== --- trunk/src/cpu/x86/car/cache_as_ram.inc Tue Apr 13 01:12:15 2010 (r5413) +++ trunk/src/cpu/intel/car/cache_as_ram.inc Wed Apr 14 09:47:07 2010 (r5423) @@ -126,6 +126,19 @@ wrmsr jmp clear_fixed_var_mtrr + +fixed_mtrr_msr: + .long 0x250, 0x258, 0x259 + .long 0x268, 0x269, 0x26A + .long 0x26B, 0x26C, 0x26D + .long 0x26E, 0x26F +var_mtrr_msr: + .long 0x200, 0x201, 0x202, 0x203 + .long 0x204, 0x205, 0x206, 0x207 + .long 0x208, 0x209, 0x20A, 0x20B + .long 0x20C, 0x20D, 0x20E, 0x20F + .long 0x000 /* NULL, end of table */ + clear_fixed_var_mtrr_out: /* 0x06 is the WB IO type for a given 4k segment. @@ -289,48 +302,118 @@ /* We need to set ebp ? No need */ movl %esp, %ebp pushl %eax /* bist */ - call stage1_main - /* We will not go back */ + call main -fixed_mtrr_msr: - .long 0x250, 0x258, 0x259 - .long 0x268, 0x269, 0x26A - .long 0x26B, 0x26C, 0x26D - .long 0x26E, 0x26F -var_mtrr_msr: - .long 0x200, 0x201, 0x202, 0x203 - .long 0x204, 0x205, 0x206, 0x207 - .long 0x208, 0x209, 0x20A, 0x20B - .long 0x20C, 0x20D, 0x20E, 0x20F - .long 0x000 /* NULL, end of table */ + /* + FIXME : backup stack in CACHE_AS_RAM into mmx and sse and after we get STACK up, we restore that. + It is only needed if we want to go back + */ + + /* We don't need cache as ram for now on */ + /* disable cache */ + movl %cr0, %eax + orl $(0x1<<30),%eax + movl %eax, %cr0 + + /* clear sth */ + movl $0x269, %ecx /* fix4k_c8000*/ + xorl %edx, %edx + xorl %eax, %eax + wrmsr - .align 0x1000 - .code16 -.global LogicalAP_SIPI -LogicalAP_SIPI: - // cr0 register is shared among the logical processors; - // so clear CD & NW bits so that the BSP's cr0 register - // controls the cache behavior - // Note: The cache behavior is determined by "OR" result - // of the cr0 registers of the logical processors +#if CONFIG_DCACHE_RAM_SIZE > 0x8000 + movl $0x268, %ecx /* fix4k_c0000*/ + wrmsr +#endif - movl %cr0, %eax - andl $0x9FFFFFFF, %eax - movl %eax, %cr0 + /* Set the default memory type and disable fixed and enable variable MTRRs */ + movl $0x2ff, %ecx +// movl $MTRRdefType_MSR, %ecx + xorl %edx, %edx + /* Enable Variable and Disable Fixed MTRRs */ + movl $0x00000800, %eax + wrmsr - finit +#if defined(CLEAR_FIRST_1M_RAM) + /* enable caching for first 1M using variable mtrr */ + movl $0x200, %ecx + xorl %edx, %edx + movl $(0 | 1), %eax +// movl $(0 | MTRR_TYPE_WRCOMB), %eax + wrmsr - // Set the semaphore to indicate the Logical AP is done - // with CAR specific initialization - movl $0x250, %ecx - movl $0x06, %eax - xorl %edx, %edx + movl $0x201, %ecx + movl $0x0000000f, %edx /* AMD 40 bit 0xff*/ + movl $((~(( 0 + 0x100000) - 1)) | 0x800), %eax + wrmsr +#endif + + /* enable cache */ + movl %cr0, %eax + andl $0x9fffffff,%eax + movl %eax, %cr0 + +#if defined(CLEAR_FIRST_1M_RAM) + /* clear the first 1M */ + movl $0x0, %edi + cld + movl $(0x100000>>2), %ecx + xorl %eax, %eax + rep stosl + + /* disable cache */ + movl %cr0, %eax + orl $(0x1<<30),%eax + movl %eax, %cr0 + + /* enable caching for first 1M using variable mtrr */ + movl $0x200, %ecx + xorl %edx, %edx + movl $(0 | 6), %eax +// movl $(0 | MTRR_TYPE_WRBACK), %eax wrmsr - // Halt this AP - cli -Halt_LogicalAP: + movl $0x201, %ecx + movl $0x0000000f, %edx /* AMD 40 bit 0xff*/ + movl $((~(( 0 + 0x100000) - 1)) | 0x800), %eax + wrmsr + + /* enable cache */ + movl %cr0, %eax + andl $0x9fffffff,%eax + movl %eax, %cr0 + invd + + /* FIXME: I hope we don't need to change esp and ebp value here, so we + * can restore value from mmx sse back But the problem is the range is + * some io related, So don't go back + */ +#endif + + /* clear boot_complete flag */ + xorl %ebp, %ebp +__main: + post_code(0x11) + cld /* clear direction flag */ + + movl %ebp, %esi + + /* For now: use CONFIG_RAMBASE + 1MB - 64K (counting downwards) as stack. This + * makes sure that we stay completely within the 1M-64K of memory that we + * preserve for suspend/resume. + */ + +#ifndef HIGH_MEMORY_SAVE +#warning Need a central place for HIGH_MEMORY_SAVE +#define HIGH_MEMORY_SAVE ( (1024 - 64) * 1024 ) +#endif + movl $(CONFIG_RAMBASE + HIGH_MEMORY_SAVE), %esp + movl %esp, %ebp + pushl %esi + call copy_and_run + +.Lhlt: + post_code(0xee) hlt - jmp Halt_LogicalAP - .code32 -.CacheAsRam_out: + jmp .Lhlt + Modified: trunk/src/cpu/intel/socket_mFCBGA479/Makefile.inc ============================================================================== --- trunk/src/cpu/intel/socket_mFCBGA479/Makefile.inc Tue Apr 13 23:31:42 2010 (r5422) +++ trunk/src/cpu/intel/socket_mFCBGA479/Makefile.inc Wed Apr 14 09:47:07 2010 (r5423) @@ -7,4 +7,4 @@ subdirs-y += ../../x86/smm subdirs-y += ../microcode -cpu_incs += $(src)/cpu/x86/car/cache_as_ram.inc +cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc Modified: trunk/src/mainboard/rca/rm4100/romstage.c ============================================================================== --- trunk/src/mainboard/rca/rm4100/romstage.c Tue Apr 13 23:31:42 2010 (r5422) +++ trunk/src/mainboard/rca/rm4100/romstage.c Wed Apr 14 09:47:07 2010 (r5423) @@ -97,9 +97,7 @@ pci_write_config8(PCI_DEV(0, 0x1f, 0), ACPI_CNTL, 0x10); } -#include "cpu/intel/model_6bx/cache_as_ram_disable.c" - -void real_main(unsigned long bist) +void main(unsigned long bist) { if (bist == 0) { if (memory_initialized()) { Modified: trunk/src/mainboard/thomson/ip1000/romstage.c ============================================================================== --- trunk/src/mainboard/thomson/ip1000/romstage.c Tue Apr 13 23:31:42 2010 (r5422) +++ trunk/src/mainboard/thomson/ip1000/romstage.c Wed Apr 14 09:47:07 2010 (r5423) @@ -96,9 +96,7 @@ pci_write_config8(PCI_DEV(0, 0x1f, 0), ACPI_CNTL, 0x10); } -#include "cpu/intel/model_6bx/cache_as_ram_disable.c" - -void real_main(unsigned long bist) +void main(unsigned long bist) { if (bist == 0) { if (memory_initialized()) { Modified: trunk/src/mainboard/tyan/s2735/romstage.c ============================================================================== --- trunk/src/mainboard/tyan/s2735/romstage.c Tue Apr 13 23:31:42 2010 (r5422) +++ trunk/src/mainboard/tyan/s2735/romstage.c Wed Apr 14 09:47:07 2010 (r5423) @@ -63,9 +63,7 @@ #include "northbridge/intel/e7501/reset_test.c" #include "lib/generic_sdram.c" - - -void stage1_main(unsigned long bist) +void main(unsigned long bist) { static const struct mem_controller memctrl[] = { { @@ -97,8 +95,7 @@ // setup_s2735_resource_map(); if(bios_reset_detected()) { - cpu_reset = 1; - goto cpu_reset_x; + hard_reset(); } enable_smbus(); @@ -119,94 +116,5 @@ #if 1 dump_pci_device(PCI_DEV(0, 0, 0)); #endif - -#if 1 - { - /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ - unsigned v_esp; - __asm__ volatile ( - "movl %%esp, %0\n\t" - : "=a" (v_esp) - ); -#if CONFIG_USE_PRINTK_IN_CAR - printk(BIOS_DEBUG, "v_esp=%08x\n", v_esp); -#else - print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\n"); -#endif - } - -#endif -#if 1 - -cpu_reset_x: - -#if CONFIG_USE_PRINTK_IN_CAR - printk(BIOS_DEBUG, "cpu_reset = %08x\n",cpu_reset); -#else - print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\n"); -#endif - - if(cpu_reset == 0) { - print_debug("Clearing initial memory region: "); - } - print_debug("No cache as ram now - "); - - /* store cpu_reset to ebx */ - __asm__ volatile ( - "movl %0, %%ebx\n\t" - ::"a" (cpu_reset) - ); - - if(cpu_reset==0) { -#define CLEAR_FIRST_1M_RAM 1 -#include "cpu/x86/car/cache_as_ram_post.c" - } - else { -#undef CLEAR_FIRST_1M_RAM -#include "cpu/x86/car/cache_as_ram_post.c" - } - - __asm__ volatile ( - /* set new esp */ /* before CONFIG_RAMBASE */ - "subl %0, %%ebp\n\t" - "subl %0, %%esp\n\t" - ::"a"( (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE)- CONFIG_RAMBASE ) - ); - - { - unsigned new_cpu_reset; - - /* get back cpu_reset from ebx */ - __asm__ volatile ( - "movl %%ebx, %0\n\t" - :"=a" (new_cpu_reset) - ); - - /* We can not go back any more, we lost old stack data in cache as ram*/ - if(new_cpu_reset==0) { - print_debug("Use Ram as Stack now - done\n"); - } else - { - print_debug("Use Ram as Stack now - \n"); - } -#if CONFIG_USE_PRINTK_IN_CAR - printk(BIOS_DEBUG, "new_cpu_reset = %08x\n", new_cpu_reset); -#else - print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\n"); -#endif - -#ifdef DEACTIVATE_CAR - print_debug("Deactivating CAR"); -#include DEACTIVATE_CAR_FILE - print_debug(" - Done.\n"); -#endif - /*copy and execute coreboot_ram */ - copy_and_run(new_cpu_reset); - /* We will not return */ - } -#endif - - print_debug("should not be here -\n"); - } Modified: trunk/src/northbridge/via/vx800/examples/romstage.c ============================================================================== --- trunk/src/northbridge/via/vx800/examples/romstage.c Tue Apr 13 23:31:42 2010 (r5422) +++ trunk/src/northbridge/via/vx800/examples/romstage.c Wed Apr 14 09:47:07 2010 (r5423) @@ -300,7 +300,7 @@ /* cache_as_ram.inc jump to here */ -void stage1_main(unsigned long bist) +void main(unsigned long bist) { unsigned cpu_reset = 0; u16 boot_mode; @@ -556,103 +556,4 @@ );*/ } #endif -/* -the following code is copied from src/mainboard/tyan/s2735/romstage.c -Only the code around CLEAR_FIRST_1M_RAM is changed. -I remove all the code around CLEAR_FIRST_1M_RAM and #include "cpu/x86/car/cache_as_ram_post.c" -the CLEAR_FIRST_1M_RAM seems to make cpu/x86/car/cache_as_ram_post.c stop at somewhere, -and cpu/x86/car/cache_as_ram_post.c do not cache my $CONFIG_XIP_ROM_BASE+SIZE area. - -So, I use: #include "cpu/via/car/cache_as_ram_post.c". my via-version post.c have some diff with x86-version -*/ -#if 1 - { - /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ - unsigned v_esp; - __asm__ volatile ("movl %%esp, %0\n\t":"=a" (v_esp) - ); -#if CONFIG_USE_PRINTK_IN_CAR - printk(BIOS_DEBUG, "v_esp=%08x\n", v_esp); -#else - print_debug("v_esp="); - print_debug_hex32(v_esp); - print_debug("\n"); -#endif - } - -#endif -#if 1 - - cpu_reset_x: -// it seems that cpu_reset is not used before this, so I just reset it, (this is because the s3 resume, setting in mtrr and copy data may destroy -//stack - cpu_reset = 0; -#if CONFIG_USE_PRINTK_IN_CAR - printk(BIOS_DEBUG, "cpu_reset = %08x\n", cpu_reset); -#else - print_debug("cpu_reset = "); - print_debug_hex32(cpu_reset); - print_debug("\n"); -#endif - - if (cpu_reset == 0) { - print_debug("Clearing initial memory region: "); - } - print_debug("No cache as ram now - "); - - /* store cpu_reset to ebx */ - __asm__ volatile ("movl %0, %%ebx\n\t"::"a" (cpu_reset) - ); - - -/* cancel these lines, CLEAR_FIRST_1M_RAM cause the cpu/x86/car/cache_as_ram_post.c stop at somewhere - - if(cpu_reset==0) { -#define CLEAR_FIRST_1M_RAM 1 -#include "cpu/via/car/cache_as_ram_post.c" - } - else { -#undef CLEAR_FIRST_1M_RAM -#include "cpu/via/car/cache_as_ram_post.c" - } -*/ -#include "cpu/via/car/cache_as_ram_post.c" -//#include "cpu/x86/car/cache_as_ram_post.c" - __asm__ volatile ( - /* set new esp *//* before CONFIG_RAMBASE */ - "subl %0, %%ebp\n\t" - "subl %0, %%esp\n\t":: - "a" ((CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE) - - CONFIG_RAMBASE) - ); - - { - unsigned new_cpu_reset; - - /* get back cpu_reset from ebx */ - __asm__ volatile ("movl %%ebx, %0\n\t":"=a" (new_cpu_reset) - ); - - /* We can not go back any more, we lost old stack data in cache as ram */ - if (new_cpu_reset == 0) { - print_debug("Use Ram as Stack now - done\n"); - } else { - print_debug("Use Ram as Stack now - \n"); - } -#if CONFIG_USE_PRINTK_IN_CAR - printk(BIOS_DEBUG, "new_cpu_reset = %08x\n", new_cpu_reset); -#else - print_debug("new_cpu_reset = "); - print_debug_hex32(new_cpu_reset); - print_debug("\n"); -#endif - /*copy and execute coreboot_ram */ - copy_and_run(new_cpu_reset); - /* We will not return */ - } -#endif - - - print_debug("should not be here -\n"); - } -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
