> > > The hardware: > > > SuperMicro H8DME-2. > > > Four 1Gbyte DDR2-667/533/400 Registered ECC SDRAM sticks from > Crucial. > > > Two Quad-Core AMD 2378 2.4 GHz Processors. > > > Onboard video. > > > One SATA disk. > > > One PATA DVD-ROM reader. > > > NULL modem serial cable from COM1 to COM1 on another PC. > > > > > > The details: > > > When booting coreboot, nothing happens for about 45 seconds. > > > Then the fans speed up to high and some messages start appearing > > > on the serial line. These messages print rather slowly (maybe > > > 1 second/message). They are: > > > > > > coreboot-4.0-r5521M Wed May 5 10:53:42 EDT 2010 starting... > > > *sysinfo range: [000cf000,000cf730] > > > bsp_apicid=00 > > > Enabling routing table for node 00 done. > > > Enabling SMP settings > > > (0,1) link=00 > > > > This looks like the bootup code for gen f Opterons. It doesn't look > > like the h8dme has a fam10 variant yet, which is what you need for the > > 2378 CPUs. > > Thanks Arne! > I'll have to figure out how to proceed from here. > > On a side note, it _looks_ like the slowdown might be due to the udelay > unification. Still bisecting.
I'm surprised you found a revision that works, since it has never supported fam10. I think it would be more fruitful for you to look at one of the boards that has both fam10 and k8 support, and try to put together an h8dme_fam10 port. Thanks, Myles -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
