Oliver wrote: >I know of the MTD driver yes, I did actually disable it in my kernel >that I built using openwrt 'doh'. Could you give me more information >int his regard? I also don`t know that much about it,sorry. At one point i used an openwrt squashfs? image and that worked but was missing some drivers. >What flash is being used though, something from the board? Or is the >IDE disk used as an MTD device? As far as i know the flashboard is a MTD device. You have to be careful with write access for the operating system because the write and erase cycles are limited. It is not an real ide disk. > I get a message from the pata_cs5536 driver that IDE is disabled by >the bios; and of course no option to enable it. I use linux kernel 2.6.24 witch is the only one i found that works with the flashboard with ide driver.(maybe a bug in 2.6.24?) I wil send you my config. I use it on a 2.5` laptop hdd connected to the ide port. I wil also send you a working version of coreboot + seabios you can play with. It is configured for ide. You wil need the geode video driver in the kernel to see something. Or you could use a serial connection. Beware there are some issues most notably loading fallback/coreboot_ram takes ~35 seconds so you have to be a little patience while booting.
Nils -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
