Marc, Here's your patch with a couple of changes: 1. took out white space changes so that I could see the devicetree.cb changes - I understood most of the changes, but why remove the register settings for the keyboard and mouse? - there's no reason we can' t use tabs when it gets committed, I just couldn't see the differences.
2. changed the Kconfig a little for your drivers - Kconfig of drivers shouldn't show up in the menu. If you build this board, you want it to have all the drivers. Signed-off-by: Myles Watson <[email protected]> Thanks, Myles
Index: svn/src/mainboard/nokia/ip530/Kconfig =================================================================== --- svn.orig/src/mainboard/nokia/ip530/Kconfig +++ svn/src/mainboard/nokia/ip530/Kconfig @@ -24,10 +24,12 @@ config BOARD_NOKIA_IP530 select NORTHBRIDGE_INTEL_I440BX select SOUTHBRIDGE_INTEL_I82371EB select SUPERIO_SMSC_SMSCSUPERIO + select DRIVERS_TI_PCI1225 + select DRIVERS_DEC21143PD select ROMCC + select PIRQ_ROUTE select HAVE_PIRQ_TABLE select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 config MAINBOARD_DIR string @@ -46,6 +48,52 @@ config HAVE_OPTION_TABLE config IRQ_SLOT_COUNT int - default 6 + default 22 depends on BOARD_NOKIA_IP530 +## Configuration items for the ethernet adaptors +config DEC21143_CACHE_LINE_SIZE + int + default 0x00000000 + depends on BOARD_NOKIA_IP530 + +config DEC21143_EXPANSION_ROM_BASE_ADDRESS + hex + default 0x00000000 + depends on BOARD_NOKIA_IP530 + +config DEC21143_COMMAND_AND_STATUS_CONFIGURATION + hex + default 0x02800107 + depends on BOARD_NOKIA_IP530 + +## Configuration for the PCMCIA-Cardbus controller. +config TI_PCMCIA_CARDBUS_CMDR + hex + default 0x0107 + depends on BOARD_NOKIA_IP530 + +config TI_PCMCIA_CARDBUS_CLSR + hex + default 0x00 + depends on BOARD_NOKIA_IP530 + +config TI_PCMCIA_CARDBUS_CLTR + hex + default 0x40 + depends on BOARD_NOKIA_IP530 + +config TI_PCMCIA_CARDBUS_BCR + hex + default 0x07C0 + depends on BOARD_NOKIA_IP530 + +config TI_PCMCIA_CARDBUS_SCR + hex + default 0x08449060 + depends on BOARD_NOKIA_IP530 + +config TI_PCMCIA_CARDBUS_MRR + hex + default 0x00007522 + depends on BOARD_NOKIA_IP530 Index: svn/src/mainboard/nokia/ip530/devicetree.cb =================================================================== --- svn.orig/src/mainboard/nokia/ip530/devicetree.cb +++ svn/src/mainboard/nokia/ip530/devicetree.cb @@ -1,5 +1,6 @@ ## ## This file is part of the coreboot project. +## This is the device tree for a Nokia IP530. ## ## Copyright (C) 2010 Marc Bertens <[email protected]> ## @@ -29,17 +30,15 @@ chip northbridge/intel/i440bx # Northbr device pci 1.0 on end # PCI/AGP bridge chip southbridge/intel/i82371eb # Southbridge device pci 7.0 on # ISA bridge - chip superio/smsc/smscsuperio # Super I/O (SMSC FDC37C878) - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 4 - end + chip superio/smsc/smscsuperio # Super I/O FDC 37C878 + # There is no connector for the Floppy + # is on the board the FDD controller is + # disabled. + device pnp 3f0.0 off end # Floppy + # There is no connector for the LPT + # device is on the board the LPT + # controller is disabled. + device pnp 3f0.3 off end # Parallel port device pnp 3f0.4 on # COM1 io 0x60 = 0x3f8 irq 0x70 = 4 @@ -48,47 +47,28 @@ chip northbridge/intel/i440bx # Northbr io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 3f0.7 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.9 on # Game port - io 0x60 = 0x201 - end - device pnp 3f0.a on # Power-management events (PME) - io 0x60 = 0x600 - end - device pnp 3f0.b on # MIDI port (MPU-401) - io 0x60 = 0x330 - irq 0x70 = 5 - end + device pnp 3f0.7 on end # PS/2 keyboard / mouse + device pnp 3f0.6 on end # RTC + device pnp 3f0.8 on end # AUX I/O + # There is no ACPI support for this + # board, therefor its disabled. + device pnp 3f0.A off end # ACPI end end device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI + # There is no USB connector therefor its disabled + device pci 7.2 off end # USB + # There is no ACPI support for this board + # so ACPI is disabled. + device pci 7.3 off end # ACPI register "ide0_enable" = "1" register "ide1_enable" = "1" register "ide_legacy_enable" = "1" # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" end - device pci 0d.0 on end # NIC (DEC DECchip 21142/43) - device pci 0e.0 on end # NIC (DEC DECchip 21142/43) - device pci 0f.0 on end # CardBus bridge (TI PCI1225) - device pci 0f.1 on end # CardBus bridge (TI PCI1225) - end - device pci_domain 1 on # PCI domain 1 - device pci 00.0 on end # PCI bridge (DEC DECchip 21150) - end - device pci_domain 2 on # PCI domain 2 - device pci 04.0 on end # NIC (DECchip 21142/43) - device pci 04.0 on end # NIC (DECchip 21142/43) end end - Index: svn/src/mainboard/nokia/ip530/irq_tables.c =================================================================== --- svn.orig/src/mainboard/nokia/ip530/irq_tables.c +++ svn/src/mainboard/nokia/ip530/irq_tables.c @@ -31,15 +31,46 @@ const struct irq_routing_table intel_irq 0x122e, /* Device */ 0, /* Miniport */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x36, /* Checksum */ + 0x44, /* Checksum */ { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x07 << 3) | 0x0, {{0x00, 0x0ea8}, {0x00, 0x0ea8}, {0x00, 0x0ea8}, {0x63, 0x0ea8}}, 0x0, 0x0}, - {0x00, (0x0c << 3) | 0x0, {{0x61, 0x06a8}, {0x62, 0x06a8}, {0x00, 0x06a8}, {0x00, 0x06a8}}, 0x0, 0x0}, - {0x00, (0x0d << 3) | 0x0, {{0x60, 0x0ea8}, {0x61, 0x0ea8}, {0x00, 0x0ea8}, {0x00, 0x0ea8}}, 0x1, 0x0}, - {0x00, (0x09 << 3) | 0x0, {{0x62, 0x0ea8}, {0x63, 0x0ea8}, {0x60, 0x0ea8}, {0x61, 0x0ea8}}, 0x2, 0x0}, - {0x00, (0x0a << 3) | 0x0, {{0x63, 0x0ea8}, {0x00, 0x0ea8}, {0x00, 0x0ea8}, {0x00, 0x0ea8}}, 0x0, 0x0}, - {0x01, (0x00 << 3) | 0x0, {{0x60, 0x0ea8}, {0x00, 0x0ea8}, {0x00, 0x0ea8}, {0x00, 0x0ea8}}, 0x0, 0x0}, + /** + * Rebuild of the PIRQ table, to fix the non-working on-board NIC and PCMCIA controller. + */ + // Southbridge 82371 + { 0x00, (0x07 << 3) | 0x0, {{0x00, 0x1E20}, {0x00, 0x1E20}, {0x00, 0x1E20}, {0x63, 0x1E20}}, 0x0, 0x0 }, + // On-board PCI-to-PCI bridge + { 0x01, (0x00 << 3) | 0x0, {{0x60, 0x1E20}, {0x61, 0x1E20}, {0x62, 0x1E20}, {0x63, 0x1E20}}, 0x0, 0x0 }, + // ETH1 on front panel + { 0x00, (0x0d << 3) | 0x0, {{0x62, 0x1E20}, {0x00, 0x1E20}, {0x00, 0x1E20}, {0x00, 0x1E20}}, 0x0, 0x0 }, + // ETH2 on front panel + { 0x00, (0x0e << 3) | 0x0, {{0x63, 0x1E20}, {0x00, 0x1E20}, {0x00, 0x1E20}, {0x00, 0x1E20}}, 0x0, 0x0 }, + // ETH3 on front panel + { 0x02, (0x04 << 3) | 0x0, {{0x60, 0x1E20}, {0x00, 0x1E20}, {0x00, 0x1E20}, {0x00, 0x1E20}}, 0x0, 0x0 }, + // ETH4 on front panel + { 0x02, (0x05 << 3) | 0x0, {{0x61, 0x1E20}, {0x00, 0x1E20}, {0x00, 0x1E20}, {0x00, 0x1E20}}, 0x0, 0x0 }, + // PCMCIA/Cardbus controller + { 0x00, (0x0f << 3) | 0x0, {{0x60, 0x1E20}, {0x61, 0x1E20}, {0x00, 0x1E20}, {0x00, 0x1E20}}, 0x0, 0x0 }, + // Bridge for slot 1 (top) + { 0x02, (0x07 << 3) | 0x0, {{0x61, 0x1E20}, {0x62, 0x1E20}, {0x63, 0x1E20}, {0x64, 0x1E20}}, 0x0, 0x0 }, + // PCI compact slots 1 (top) + { 0x03, (0x04 << 3) | 0x0, {{0x61, 0x1E20}, {0x62, 0x1E20}, {0x63, 0x1E20}, {0x60, 0x1E20}}, 0x1, 0x0 }, + { 0x03, (0x05 << 3) | 0x0, {{0x62, 0x1E20}, {0x63, 0x1E20}, {0x60, 0x1E20}, {0x61, 0x1E20}}, 0x2, 0x0 }, + { 0x03, (0x06 << 3) | 0x0, {{0x63, 0x1E20}, {0x60, 0x1E20}, {0x61, 0x1E20}, {0x62, 0x1E20}}, 0x3, 0x0 }, + { 0x03, (0x07 << 3) | 0x0, {{0x60, 0x1E20}, {0x61, 0x1E20}, {0x62, 0x1E20}, {0x63, 0x1E20}}, 0x4, 0x0 }, + // Bridge for slot 2 (middle) + { 0x02, (0x06 << 3) | 0x0, {{0x61, 0x1E20}, {0x62, 0x1E20}, {0x63, 0x1E20}, {0x60, 0x1E20}}, 0x0, 0x0 }, + // PCI compact slots 2 (middle) + { 0x04, (0x04 << 3) | 0x0, {{0x61, 0x1E20}, {0x62, 0x1E20}, {0x63, 0x1E20}, {0x60, 0x1E20}}, 0x5, 0x0 }, + { 0x04, (0x05 << 3) | 0x0, {{0x62, 0x1E20}, {0x63, 0x1E20}, {0x60, 0x1E20}, {0x61, 0x1E20}}, 0x6, 0x0 }, + { 0x04, (0x06 << 3) | 0x0, {{0x63, 0x1E20}, {0x60, 0x1E20}, {0x61, 0x1E20}, {0x62, 0x1E20}}, 0x7, 0x0 }, + { 0x04, (0x07 << 3) | 0x0, {{0x60, 0x1E20}, {0x61, 0x1E20}, {0x62, 0x1E20}, {0x63, 0x1E20}}, 0x8, 0x0 }, + // Bridge for slot 3 (bottom) + { 0x00, (0x10 << 3) | 0x0, {{0x61, 0x1E20}, {0x62, 0x1E20}, {0x63, 0x1E20}, {0x60, 0x1E20}}, 0x0, 0x0 }, + // PCI compact slots 3 (bottom) + { 0x05, (0x04 << 3) | 0x0, {{0x61, 0x1E20}, {0x62, 0x1E20}, {0x63, 0x1E20}, {0x60, 0x1E20}}, 0x9, 0x0 }, + { 0x05, (0x05 << 3) | 0x0, {{0x62, 0x1E20}, {0x63, 0x1E20}, {0x60, 0x1E20}, {0x61, 0x1E20}}, 0xA, 0x0 }, + { 0x05, (0x06 << 3) | 0x0, {{0x63, 0x1E20}, {0x60, 0x1E20}, {0x61, 0x1E20}, {0x62, 0x1E20}}, 0xB, 0x0 }, + { 0x05, (0x07 << 3) | 0x0, {{0x60, 0x1E20}, {0x61, 0x1E20}, {0x62, 0x1E20}, {0x63, 0x1E20}}, 0xC, 0x0 }, } }; @@ -47,3 +78,13 @@ unsigned long write_pirq_routing_table(u { return copy_pirq_routing_table(addr); } + +/** + * TODO: This stub function is here until the point is solved in the + * main code of coreboot. see also arch/i386/boot/pirq_tables.c + */ +void pirq_assign_irqs(const unsigned char pIntAtoD[4]) +{ + return; +} + Index: svn/src/mainboard/nokia/ip530/mainboard.c =================================================================== --- svn.orig/src/mainboard/nokia/ip530/mainboard.c +++ svn/src/mainboard/nokia/ip530/mainboard.c @@ -20,7 +20,44 @@ #include <device/device.h> #include "chip.h" +#include <device/pci_def.h> +#include <device/pci.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <console/console.h> +#define OUTB outb +#define INB inb + +/* +* Taken from flashrom project +* Generic Super I/O helper functions +*/ +static uint8_t sio_read(uint16_t port, uint8_t reg) +{ + OUTB( reg, port ); + return ( INB( port + 1 ) ); +} + +static void sio_write(uint16_t port, uint8_t reg, uint8_t data) +{ + OUTB( reg, port ); + OUTB( data, port + 1 ); + return; +} + +static void nokia_ip530_board_enable( device_t dev ) +{ + print_debug( "Setting up IP530-Super I/O devices\n"); + sio_write( 0x20, 0x03, 0x80 ); + printk( BIOS_DEBUG, "--Register 0x03 = %X := 0x80\n", sio_read( 0x20, 0x03 ) ); + sio_write( 0x20, 0x22, 0x30 ); + printk( BIOS_DEBUG, "--Register 0x22 = %X := 0x30\n", sio_read( 0x20, 0x22 ) ); + sio_write( 0x20, 0x24, 0x84 ); + printk( BIOS_DEBUG, "--Register 0x24 = %X := 0x84\n", sio_read( 0x20, 0x24 ) ); + return; +} struct chip_operations mainboard_ops = { - CHIP_NAME("Nokia IP530 Mainboard") + CHIP_NAME("NOKIA IP530 Mainboard") + .enable_dev = nokia_ip530_board_enable, };
Index: svn/src/drivers/Kconfig =================================================================== --- svn.orig/src/drivers/Kconfig +++ svn/src/drivers/Kconfig @@ -23,3 +23,18 @@ config DRIVERS_SIL help It sets PCI class to IDE compatible native mode, allowing SeaBIOS, FILO etc... to boot from it. + +config DRIVERS_TI_PCI1225 + select DRIVERS_TI + bool + +config DRIVERS_TI_PCI1420 + select DRIVERS_TI + bool + +config DRIVERS_TI_PCI1520 + select DRIVERS_TI + bool + +config DRIVERS_DEC21143PD + bool Index: svn/src/drivers/Makefile.inc =================================================================== --- svn.orig/src/drivers/Makefile.inc +++ svn/src/drivers/Makefile.inc @@ -1,3 +1,5 @@ subdirs-y += generic/debug subdirs-y += ati/ragexl subdirs-y += sil/3114 +subdirs-y += ti/pcmcia-cardbus +subdirs-y += dec/21143 Index: svn/src/drivers/dec/21143/21143pd.c =================================================================== --- /dev/null +++ svn/src/drivers/dec/21143/21143pd.c @@ -0,0 +1,77 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Marc Bertens <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <console/console.h> + +/** + * The following can be over ridden, by puting them in the mainboard specific + * Kconfig file with the value to use. + */ +#ifndef CONFIG_DEC21143_CACHE_LINE_SIZE +// Corrects the 'Cache Line Size Register' to a initial value, +#define CONFIG_DEC21143_CACHE_LINE_SIZE 0x00000000 +#endif + +#ifndef CONFIG_DEC21143_EXPANSION_ROM_BASE_ADDRESS +// Sets the 'Expansion ROM Base Address' for the controller +#define CONFIG_DEC21143_EXPANSION_ROM_BASE_ADDRESS 0x00000000 +#endif + +#ifndef CONFIG_DEC21143_COMMAND_AND_STATUS_CONFIGURATION +// Set the 'Command and Status Configuration', when not sure set +// 0x02800107 or 0x02800007 +#define CONFIG_DEC21143_COMMAND_AND_STATUS_CONFIGURATION 0x02800107 +#endif + +/** + * This driver take the values from Kconfig and load them in the registers + */ +static void dec_21143pd_enable( device_t dev ) +{ + printk( BIOS_DEBUG, "Init of DECchip 21143PD/TD Kconfig style\n"); + // Command and Status Configuration Register (CFCS–Offset 04H) + pci_write_config32( dev, 0x04, CONFIG_DEC21143_COMMAND_AND_STATUS_CONFIGURATION ); + printk( BIOS_DEBUG, "0x04 = %08x (07 01 80 02)\n", pci_read_config32(dev, 0x04) ); + // Cache Line Size Register (Offset 0x0C) + pci_write_config8( dev, 0x0C, CONFIG_DEC21143_CACHE_LINE_SIZE ); + printk( BIOS_DEBUG, "0x0c = %08x (00 80 00 00)\n", pci_read_config32(dev, 0x0C) ); + // Expansion ROM Base Address Register (CBER–Offset 30H) + pci_write_config32( dev, 0x30, CONFIG_DEC21143_EXPANSION_ROM_BASE_ADDRESS ); + printk( BIOS_DEBUG, "0x30 = %08x (0x00000000)\n", pci_read_config32(dev, 0x30) ); + return; +} + +static struct device_operations dec_21143pd_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = dec_21143pd_enable, + .scan_bus = 0, +}; + +static const struct pci_driver dec_21143pd_driver __pci_driver = { + .ops = &dec_21143pd_ops, + .vendor = PCI_VENDOR_ID_DEC, + .device = PCI_DEVICE_ID_DEC_21142, +}; Index: svn/src/drivers/dec/21143/Makefile.inc =================================================================== --- /dev/null +++ svn/src/drivers/dec/21143/Makefile.inc @@ -0,0 +1,2 @@ +driver-$(CONFIG_DRIVERS_DEC21143PD) += 21143pd.o + Index: svn/src/drivers/ti/pcmcia-cardbus/Makefile.inc =================================================================== --- /dev/null +++ svn/src/drivers/ti/pcmcia-cardbus/Makefile.inc @@ -0,0 +1,2 @@ +driver-$(CONFIG_DRIVERS_TI) += ti-pcmcia-cardbus.o + Index: svn/src/drivers/ti/pcmcia-cardbus/ti-pcmcia-cardbus.c =================================================================== --- /dev/null +++ svn/src/drivers/ti/pcmcia-cardbus/ti-pcmcia-cardbus.c @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Marc Bertens <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <console/console.h> + +#if ( !defined( CONFIG_TI_PCMCIA_CARDBUS_CMDR ) || \ + !defined( CONFIG_TI_PCMCIA_CARDBUS_CLSR ) || \ + !defined( CONFIG_TI_PCMCIA_CARDBUS_CLTR ) || \ + !defined( CONFIG_TI_PCMCIA_CARDBUS_BCR ) || \ + !defined( CONFIG_TI_PCMCIA_CARDBUS_SCR ) || \ + !defined( CONFIG_TI_PCMCIA_CARDBUS_MRR ) ) +#error "you must supply these values in your mainboard-specific Kconfig file" +#endif + +static void ti_pci1x2y_init(struct device *dev) +{ + printk(BIOS_INFO, "Init of Texas Instruments PCI1x2x PCMCIA/CardBus controller\n"); + // Command register (offset 04) + pci_write_config16( dev, 0x04, CONFIG_TI_PCMCIA_CARDBUS_CMDR ); + // Cache Line Size Register (offset 0x0C) + pci_write_config8( dev, 0x0C, CONFIG_TI_PCMCIA_CARDBUS_CLSR ); + // CardBus latency timer register (offset 1B) + pci_write_config8( dev, 0x1B, CONFIG_TI_PCMCIA_CARDBUS_CLTR ); + // Bridge control register (offset 3E) + pci_write_config16( dev, 0x3E, CONFIG_TI_PCMCIA_CARDBUS_BCR ); + /** Enable change sub-vendor id + * Clear the bit 5 to enable to write to the sub-vendor/device ids at 40 and 42 */ + pci_write_config32( dev, 0x80, 0x10 ); + pci_write_config32( dev, 0x40, PCI_VENDOR_ID_NOKIA ); + // Now write the correct value for SCR + // System Control Register (offset 0x80) + pci_write_config32( dev, 0x80, CONFIG_TI_PCMCIA_CARDBUS_SCR ); + // Multifunction routing register + pci_write_config32( dev, 0x8C, CONFIG_TI_PCMCIA_CARDBUS_MRR ); + // Set Device Control Register (0x92) accordingly + pci_write_config8( dev, 0x92, pci_read_config8( dev, 0x92 ) | 0x02 ); + return; +} + +static struct device_operations ti_pci1x2y_ops = { + .read_resources = NULL, //pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = ti_pci1x2y_init, + .scan_bus = 0, +}; + +#ifdef CONFIG_DRIVERS_TI_PCI1225 +static const struct pci_driver ti_pci1225_driver __pci_driver = { + .ops = &ti_pci1x2y_ops, + .vendor = PCI_VENDOR_ID_TI, + .device = PCI_DEVICE_ID_TI_1225, +}; + +#endif +#ifdef CONFIG_DRIVERS_TI_PCI1420 +static const struct pci_driver ti_pci1420_driver __pci_driver = { + .ops = &ti_pci1x2y_ops, + .vendor = PCI_VENDOR_ID_TI, + .device = PCI_DEVICE_ID_TI_1420, +}; +#endif +#ifdef CONFIG_DRIVERS_TI_PCI1520 +static const struct pci_driver ti_pci1520_driver __pci_driver = { + .ops = &ti_pci1x2y_ops, + .vendor = PCI_VENDOR_ID_TI, + .device = PCI_DEVICE_ID_TI_1420, +}; +#endif + + Index: svn/src/include/device/pci_ids.h =================================================================== --- svn.orig/src/include/device/pci_ids.h +++ svn/src/include/device/pci_ids.h @@ -696,6 +696,7 @@ #define PCI_DEVICE_ID_TI_4410 0xac41 #define PCI_DEVICE_ID_TI_4451 0xac42 #define PCI_DEVICE_ID_TI_1420 0xac51 +#define PCI_DEVICE_ID_TI_1520 0xAC55 #define PCI_VENDOR_ID_SONY 0x104d #define PCI_DEVICE_ID_SONY_CXD3222 0x8039 @@ -1741,6 +1742,10 @@ #define PCI_DEVICE_ID_CCD_B00C 0xb00c #define PCI_DEVICE_ID_CCD_B100 0xb100 +#define PCI_VENDOR_ID_NOKIA 0x13B8 // Nokia Telecommunications oy +#define PCI_VENDOR_ID_NOKIA_WIRELESS 0x1603 // Nokia Wireless Communications +#define PCI_VENDOR_ID_NOKIA_HOME 0x1622 // Nokia Home Communications + #define PCI_VENDOR_ID_3WARE 0x13C1 #define PCI_DEVICE_ID_3WARE_1000 0x1000
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
