Hi: I am interested in this motherboard for BIOS developing too. I think this board has a flash chip that you can plug out manually (without soldering) right? Where did you buy it? Form on-line or a local store? I am in the USA. Also, is this board supported by coreboot? I checked the coreboot wiki but cannot find it. Thanks a lot.
Regards, Jiang On Thu, Jun 3, 2010 at 6:36 PM, xdrudis <[email protected]> wrote: > Hello. > > I finally bought the hardware I told you and installed gnewsense 3 with a > custom linux-libre 2.6.34 : > mainboard Asus M4A77TD-PRO > http://www.asus.com/product.aspx?P_ID=0AvsBb7WBZe2i9zK > CPU AMD Phenom X4 910e stepping c3 > AMD 770 > AMD SB710 > RAM 2 x 4Gb dual channel non-ECC G.Skill DDR3-1333 PC3 10666 > F3-10666CL9D-8GBRL > superio ITE IT8712F (clearly marked on the chip and detected) > lan: RTL8112L > audio VIA VT1708S > > I've put a graphics card by MSI, Nvidia GeForce 8400GS passively cooled (no > fan) on the PCIExpress 2.0 slot. > > I'll attachs the lspci and superiotool r3125 outputs (versions from gNewSense) > and flashrom 0.9.2 downloaded and compiled from release tarball. > > Btw. The readme in flashrom 0.9.2 says to use make DESTDIR=/usr install > if you don't want it in /usr/local, but this will install it in > /usr/usr/local/sbin. To have it in /usr/sbin you need to run makePREFIX=/usr > install. > It's slightly confusing for me, I've had to look at the Makefile. > > Now, the first thing I want to do is to buy spare flash chips. > But I'm not sure what chips or where to buy them. > > It's a socket with an eight pin chip (DIP-8?) > (4 pins per side), roughly 5mm x 9mm > I'd say it's by Macronix (and flashrom agrees). But I doubt about > the specific model. The motherboard manual says "8Mb Flash ROM". > > The letters on the chip are very small and there's some marking over them > that keeps me from reading them all . > I'll copy here what I can read (i mark the most dubious letters with ?). > (top left is a logo MX) > > - - - - > -- -- - - > = v = = = b09?714 > = = = = > > 25L5???5PC-15G > 3C153600 > TAIWAN > > Looking at catalogues from macronix I think 25L is the > family (SPI serial flash) 5?? should be the size (I'm not > sure how many digits are there, not even 100% sure it's a 5) > ?5 would be normal, write protected, duplex,etc. > PC might be the process ( xx micrometers), -15 would be > frequency of 66 Mhz and G something about lead free or environmental > regulations. > > but flashrom says its a Macronix MX25L8005 . > http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/6F878CF760C559BD482576E00022E6CC/?OpenDocument&EPN=MX25L8005 > > Now, the question is should I buy some MX25L8005 ? (apparently its > end of life is 2010-11-30, so it should be available, but where in > small quantities ? ) > > According to > http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/430AA5580EA1C72E482576BE0004AF37/$File/PCN-10-035-B.pdf > maybe I could try > Mx25L8006EPI-12G > > Where do you get your spare EEPROMs ? > > Thank you. > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot > -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot

