hi, it's external flash programmer SF100 and SB700 On Thu, Jun 17, 2010 at 6:08 PM, Peter Stuge <[email protected]> wrote:
> Hello, > > Qing Pei Wang wrote: > > Recently i found that the mainboard which i used(Jetway PA78VM-H-LF) > > is not stable, most of the spi flashing caused data error. > > the data writing is ok, but the bios data does not as the same as the > > original. the SPI FLASH is Winbond W25X80A > > Is the flash chip flashed onboard using flashrom, or externally by > another system? > > If onboard, what chip is SPI bus master on the board? Is it the SB700 > or some LPC->SPI bridge? > > > //Peter > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot > -- Wang Qing Pei MSN:[email protected] <msn%[email protected]> Gmail:[email protected] <gmail%[email protected]> Phone:86+13426369984
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
