On 17/06/10 22:07, Anders Jenbo wrote: > All your chips seams to be supported so getting your board working > shouldn't be to hard. > > As fare as i can see on flashrom.org, the status for writing to "SST > SST25VF040.REMS" is just unknown, if it really doesn't work, then > another option might be to find a compatible chip that is supported for > write. In any case you will probably need to desolder it so that you can > switch back to the original in case your port doesn't work in the first > attempt (likely). > > I sugest that you copy the code for Kontron 986LCD-M/mITX, as it seams > the closes working match. You might also take a peak at Tyan Tiger K8W > (S2875) as it uses the same SuperIO as your board.
Thanks for the reply! Will do so as soon as other projects are out of the way :-) Best regards! -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
