It should be Signed-off-by: Kerry She <[email protected]>

> -----Original Message-----
> From: [email protected]
[mailto:[email protected]]
> On Behalf Of repository service
> Sent: Tuesday, August 17, 2010 10:15 AM
> To: [email protected]
> Subject: [coreboot] [commit] r5703 - trunk/src/southbridge/amd/rs780
> 
> Author: zbao
> Date: Tue Aug 17 04:14:53 2010
> New Revision: 5703
> URL: https://tracker.coreboot.org/trac/coreboot/changeset/5703
> 
> Log:
> Feature of lane reversal of AMD RS780 is tested.
> 
> Signed-off-by: Zheng Bao <[email protected]>
> Acked-by: Marc Jones <[email protected]>
> 
> Modified:
>    trunk/src/southbridge/amd/rs780/rs780_gfx.c
> 
> Modified: trunk/src/southbridge/amd/rs780/rs780_gfx.c
>
========================================================================
==
> ====
> --- trunk/src/southbridge/amd/rs780/rs780_gfx.c       Mon Aug 16
22:00:49 2010
>       (r5702)
> +++ trunk/src/southbridge/amd/rs780/rs780_gfx.c       Tue Aug 17
04:14:53 2010
>       (r5703)
> @@ -1178,9 +1178,11 @@
>       /* Single-port/Dual-port configureation. */
>       switch (cfg->gfx_dual_slot) {
>       case 0:
> -             /* step 1, lane reversal (only need if CMOS option is
enabled)
> */
> +             /* step 1, lane reversal (only need if build config
option is
> enabled) */
>               if (cfg->gfx_lane_reversal) {
> +                     set_nbmisc_enable_bits(nb_dev, 0x36, 1 << 31, 1
<< 31);
>                       set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 2, 1
<< 2);
> +                     set_nbmisc_enable_bits(nb_dev, 0x36, 1 << 31, 0
<< 31);
>               }
>               printk(BIOS_DEBUG, "rs780_gfx_init step1.\n");
> 
> @@ -1194,10 +1196,12 @@
> 
>               break;
>       case 1:
> -             /* step 1, lane reversal (only need if CMOS option is
enabled)
> */
> +             /* step 1, lane reversal (only need if build config
option is
> enabled) */
>               if (cfg->gfx_lane_reversal) {
> +                     set_nbmisc_enable_bits(nb_dev, 0x36, 1 << 31, 1
<< 31);
>                       set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 2, 1
<< 2);
>                       set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 3, 1
<< 3);
> +                     set_nbmisc_enable_bits(nb_dev, 0x36, 1 << 31, 0
<< 31);
>               }
>               printk(BIOS_DEBUG, "rs780_gfx_init step1.\n");
>               /* step 1.1, dual-slot gfx configuration (only need if
CMOS
> option is enabled) */
> 
> --
> coreboot mailing list: [email protected]
> http://www.coreboot.org/mailman/listinfo/coreboot



-- 
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to