Hi,

attached patch derives coreboot create bus data in the mptable
automatically from the device tree for a couple more boards.

It's build tested, but not run tested.

Signed-off-by: Patrick Georgi <[email protected]>
Index: src/mainboard/via/epia-n/mptable.c
===================================================================
--- src/mainboard/via/epia-n/mptable.c  (Revision 5739)
+++ src/mainboard/via/epia-n/mptable.c  (Arbeitskopie)
@@ -12,6 +12,7 @@
         static const char oem[8] = "COREBOOT";
         static const char productid[12] = "P4DPE       ";
         struct mp_config_table *mc;
+        int isa_bus;
 
         mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
         memset(mc, 0, sizeof(*mc));
@@ -31,12 +32,8 @@
         mc->reserved = 0;
 
         smp_write_processors(mc);
+        mptable_write_buses(mc, NULL, &isa_bus);
 
-
-/*Bus:         Bus ID  Type*/
-       smp_write_bus(mc, 0, "PCI   ");
-       smp_write_bus(mc, 1, "PCI   ");
-       smp_write_bus(mc, 2, "ISA   ");
 /*I/O APICs:   APIC ID Version State           Address*/
        smp_write_ioapic(mc, 2, 0x20, 0xfec00000);
        {
@@ -71,7 +68,7 @@
                        }
                 }
        }
-       mptable_add_isa_interrupts(mc, 0x2, 0x2, 0);
+       mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0);
 
 /*I/O Ints:    Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 
0x0, 0x40, 0x2, 0x15);
Index: src/mainboard/via/pc2500e/mptable.c
===================================================================
--- src/mainboard/via/pc2500e/mptable.c (Revision 5739)
+++ src/mainboard/via/pc2500e/mptable.c (Arbeitskopie)
@@ -29,9 +29,6 @@
 #include <stdint.h>
 #include "../../../southbridge/via/vt8237r/vt8237r.h"
 
-
-#define bus_isa 2
-
 static void *smp_write_config_table(void *v)
 {
        static const char sig[4] = "PCMP";
@@ -39,7 +36,7 @@
        static const char productid[12] = "PC2500      ";
        struct mp_config_table *mc;
 
-       int bus_num;
+       int isa_bus;
 
        mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
        memset(mc, 0, sizeof(*mc));
@@ -59,21 +56,13 @@
        mc->reserved = 0;
 
        smp_write_processors(mc);
+       mptable_write_buses(mc, NULL, &isa_bus);
 
-
-/* Bus:                Bus ID  Type*/
-       /* define numbers for pci and isa bus */
-       for (bus_num = 0; bus_num < bus_isa; bus_num++) {
-               smp_write_bus(mc, bus_num, "PCI   ");
-       }
-       smp_write_bus(mc, bus_isa, "ISA   ");
-
-
 /* I/O APICs:  APIC ID Version State           Address*/
        smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, VT8237R_APIC_BASE);
 
        /* Now, assemble the table. */
-       mptable_add_isa_interrupts(mc, bus_isa, VT8237R_APIC_ID, 0);
+       mptable_add_isa_interrupts(mc, isa_bus, VT8237R_APIC_ID, 0);
 
 #define PCI_INT(bus, dev, fn, pin) \
        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, \
Index: src/mainboard/via/vt8454c/mptable.c
===================================================================
--- src/mainboard/via/vt8454c/mptable.c (Revision 5739)
+++ src/mainboard/via/vt8454c/mptable.c (Arbeitskopie)
@@ -33,6 +33,7 @@
        static const char oem[8] = "COREBOOT";
        static const char productid[12] = "VIA VT8454C ";
        struct mp_config_table *mc;
+       int isa_bus;
 
        mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
        memset(mc, 0, sizeof(*mc));
@@ -52,18 +53,12 @@
        mc->reserved = 0;
 
        smp_write_processors(mc);
+       mptable_write_buses(mc, NULL, &isa_bus);
 
-       /*Bus:          Bus ID  Type */
-       smp_write_bus(mc, 0, "PCI   ");
-       smp_write_bus(mc, 1, "PCI   ");
-       smp_write_bus(mc, 2, "PCI   ");
-       smp_write_bus(mc, 128, "PCI   ");
-       smp_write_bus(mc, 129, "ISA   ");
-
        /* I/O APICs:   APIC ID Version State Address */
        smp_write_ioapic(mc, 2, 17, 0xfec00000);
 
-       mptable_add_isa_interrupts(mc, 0x81, 0x2, 0);
+       mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0);
 
        /* I/O Ints:    Type    Polarity    Trigger     Bus ID   IRQ    APIC ID 
PIN# */
        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | 
MP_IRQ_POLARITY_LOW, 0x0, 0x40, 0x2, 0x14);
Index: src/mainboard/tyan/s2735/mptable.c
===================================================================
--- src/mainboard/tyan/s2735/mptable.c  (Revision 5739)
+++ src/mainboard/tyan/s2735/mptable.c  (Arbeitskopie)
@@ -10,6 +10,7 @@
         static const char oem[8] = "COREBOOT";
         static const char productid[12] = "S2735       ";
         struct mp_config_table *mc;
+        int isa_bus;
 
         mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
         memset(mc, 0, sizeof(*mc));
@@ -29,15 +30,7 @@
         mc->reserved = 0;
 
         smp_write_processors(mc);
-
-
-/*Bus:         Bus ID  Type*/
-       smp_write_bus(mc, 0, "PCI   ");
-       smp_write_bus(mc, 1, "PCI   ");
-       smp_write_bus(mc, 2, "PCI   ");
-       smp_write_bus(mc, 3, "PCI   ");
-       smp_write_bus(mc, 4, "PCI   ");
-       smp_write_bus(mc, 5, "ISA   ");
+       mptable_write_buses(mc, NULL, &isa_bus);
 /*I/O APICs:   APIC ID Version State           Address*/
        smp_write_ioapic(mc, 8, 0x20, 0xfec00000);
        {
@@ -58,7 +51,7 @@
                         }
                }
        }
-       mptable_add_isa_interrupts(mc, 0x5, 0x8, 0);
+       mptable_add_isa_interrupts(mc, isa_bus, 0x8, 0);
 
 /*I/O Ints:    Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN#
 */
Index: src/mainboard/tyan/s2850/mptable.c
===================================================================
--- src/mainboard/tyan/s2850/mptable.c  (Revision 5739)
+++ src/mainboard/tyan/s2850/mptable.c  (Arbeitskopie)
@@ -50,8 +50,7 @@
         static const char productid[12] = "S2850       ";
         struct mp_config_table *mc;
 
-        unsigned char bus_num;
-        unsigned char bus_isa;
+        int bus_isa;
        unsigned char bus_chain_0;
         unsigned char bus_8111_1;
         unsigned apicid_base;
@@ -88,24 +87,16 @@
                 dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0));
                 if (dev) {
                         bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_isa    = pci_read_config8(dev, 
PCI_SUBORDINATE_BUS);
-                        bus_isa++;
                 }
                 else {
                         printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, 
using defaults\n");
 
                         bus_8111_1 = 2;
-                        bus_isa = 3;
                 }
         }
 /*Bus:          Bus ID  Type*/
-        /* define bus and isa numbers */
-        for(bus_num = 0; bus_num < bus_isa; bus_num++) {
-                smp_write_bus(mc, bus_num, "PCI   ");
-        }
-        smp_write_bus(mc, bus_isa, "ISA   ");
+       mptable_write_buses(mc, NULL, &bus_isa);
 
-
 /*I/O APICs:   APIC ID Version State           Address*/
 #if CONFIG_LOGICAL_CPUS==1
        apicid_base = get_apicid_base(1);
Index: src/mainboard/tyan/s2875/mptable.c
===================================================================
--- src/mainboard/tyan/s2875/mptable.c  (Revision 5739)
+++ src/mainboard/tyan/s2875/mptable.c  (Arbeitskopie)
@@ -48,8 +48,7 @@
         static const char productid[12] = "S2875       ";
         struct mp_config_table *mc;
 
-        unsigned char bus_num;
-        unsigned char bus_isa;
+        int bus_isa;
        unsigned char bus_chain_0;
         unsigned char bus_8111_1;
        unsigned char bus_8151_1;
@@ -89,15 +88,11 @@
                 dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x04,0));
                 if (dev) {
                         bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_isa    = pci_read_config8(dev, 
PCI_SUBORDINATE_BUS);
-                        bus_isa++;
-                       printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa);
                 }
                 else {
                         printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, 
using defaults\n");
 
                         bus_8111_1 = 3;
-                        bus_isa = 4;
                 }
                       /* 8151 */
                 dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0));
@@ -116,11 +111,7 @@
         }
 
 /*Bus:         Bus ID  Type*/
-       /* define bus and isa numbers */
-        for(bus_num = 0; bus_num < bus_isa; bus_num++) {
-                smp_write_bus(mc, bus_num, "PCI   ");
-        }
-        smp_write_bus(mc, bus_isa, "ISA   ");
+       mptable_write_buses(mc, NULL, &bus_isa);
 
 /*I/O APICs:   APIC ID Version State           Address*/
 #if CONFIG_LOGICAL_CPUS==1
Index: src/mainboard/tyan/s2880/mptable.c
===================================================================
--- src/mainboard/tyan/s2880/mptable.c  (Revision 5739)
+++ src/mainboard/tyan/s2880/mptable.c  (Arbeitskopie)
@@ -50,8 +50,7 @@
         static const char productid[12] = "S2880       ";
         struct mp_config_table *mc;
 
-        unsigned char bus_num;
-        unsigned char bus_isa;
+        int bus_isa;
        unsigned char bus_chain_0;
         unsigned char bus_8131_1;
         unsigned char bus_8131_2;
@@ -94,14 +93,11 @@
                 dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0));
                 if (dev) {
                         bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_isa    = pci_read_config8(dev, 
PCI_SUBORDINATE_BUS);
-                        bus_isa++;
                 }
                 else {
                         printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, 
using defaults\n");
 
                         bus_8111_1 = 4;
-                        bus_isa = 5;
                 }
                 /* 8131-1 */
                 dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0));
@@ -128,13 +124,8 @@
         }
 
 /*Bus:          Bus ID  Type*/
-        /* define bus and isa numbers */
-        for(bus_num = 0; bus_num < bus_isa; bus_num++) {
-                smp_write_bus(mc, bus_num, "PCI   ");
-        }
-        smp_write_bus(mc, bus_isa, "ISA   ");
+       mptable_write_buses(mc, NULL, &bus_isa);
 
-
 /*I/O APICs:   APIC ID Version State           Address*/
 #if CONFIG_LOGICAL_CPUS==1
        apicid_base = get_apicid_base(3);
Index: src/mainboard/tyan/s4880/mptable.c
===================================================================
--- src/mainboard/tyan/s4880/mptable.c  (Revision 5739)
+++ src/mainboard/tyan/s4880/mptable.c  (Arbeitskopie)
@@ -48,8 +48,7 @@
         static const char productid[12] = "S4880       ";
         struct mp_config_table *mc;
 
-        unsigned char bus_num;
-        unsigned char bus_isa;
+        int bus_isa;
        unsigned char bus_chain_0;
         unsigned char bus_8131_1;
         unsigned char bus_8131_2;
@@ -93,14 +92,11 @@
                 dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0));
                 if (dev) {
                         bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_isa    = pci_read_config8(dev, 
PCI_SUBORDINATE_BUS);
-                        bus_isa++;
                 }
                 else {
                         printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, 
using defaults\n");
 
                         bus_8111_1 = 4;
-                        bus_isa = 5;
                 }
                 /* 8131-1 */
                 dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0));
@@ -127,13 +123,8 @@
         }
 
 /*Bus:          Bus ID  Type*/
-        /* define bus and isa numbers */
-        for(bus_num = 0; bus_num < bus_isa; bus_num++) {
-                smp_write_bus(mc, bus_num, "PCI   ");
-        }
-        smp_write_bus(mc, bus_isa, "ISA   ");
+       mptable_write_buses(mc, NULL, &bus_isa);
 
-
 /*I/O APICs:   APIC ID Version State           Address*/
 #if CONFIG_LOGICAL_CPUS==1
        apicid_base = get_apicid_base(3);
Index: src/mainboard/tyan/s4882/mptable.c
===================================================================
--- src/mainboard/tyan/s4882/mptable.c  (Revision 5739)
+++ src/mainboard/tyan/s4882/mptable.c  (Arbeitskopie)
@@ -49,8 +49,7 @@
         static const char productid[12] = "S4882       ";
         struct mp_config_table *mc;
 
-        unsigned char bus_num;
-        unsigned char bus_isa;
+        int bus_isa;
        unsigned char bus_chain_0;
         unsigned char bus_8131_1;
         unsigned char bus_8131_2;
@@ -94,14 +93,11 @@
                 dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0));
                 if (dev) {
                         bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_isa    = pci_read_config8(dev, 
PCI_SUBORDINATE_BUS);
-                        bus_isa++;
                 }
                 else {
                         printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, 
using defaults\n");
 
                         bus_8111_1 = 4;
-                        bus_isa = 5;
                 }
                 /* 8131-1 */
                 dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0));
@@ -128,13 +124,8 @@
         }
 
 /*Bus:          Bus ID  Type*/
-        /* define bus and isa numbers */
-        for(bus_num = 0; bus_num < bus_isa; bus_num++) {
-                smp_write_bus(mc, bus_num, "PCI   ");
-        }
-        smp_write_bus(mc, bus_isa, "ISA   ");
+       mptable_write_buses(mc, NULL, &bus_isa);
 
-
 /*I/O APICs:   APIC ID Version State           Address*/
 #if CONFIG_LOGICAL_CPUS==1
        apicid_base = get_apicid_base(3);
-- 
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to