> Multiboot Information structure has been written. > POST: 0x9d > Adding CBMEM entry as no. 5 > Writing high table forward entry at 0x00000500 > Wrote coreboot table at: 00000500 - 00000518 checksum 9fde > New low_table_end: 0x00000518 > Now going to write high coreboot table at 0x7fffe000 > rom_table_end = 0x7fffe000 > Adjust low_table_end from 0x00000518 to 0x00001000 > Adjust rom_table_end from 0x7fffe000 to 0x80000000 > Adding high table area > uma_memory_start=0x70000000, uma_memory_size=0x10000000 > coreboot memory table: > 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES > 1. 0000000000001000-000000000009ffff: RAM > 2. 00000000000c0000-000000006fffffff: RAM > 3. 0000000070000000-000000007fffffff: RESERVED > Wrote coreboot table at: 7fffe000 - 7fffe8bc checksum 3af4 > coreboot table: 2236 bytes. > > It doesn't seem good that the Multiboot table gets written before the > UMA and high table areas are added. I would think that's why they > don't show up.
Maybe this log is too old. If my comments don't apply anymore, could you send your latest log to the list? Thanks, Myles -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
