Dear coreboot readers!
This is the automatic build system of coreboot.
The developer "wt" checked in revision 5883 to
the coreboot repository. This caused the following
changes:
Change Log:
Move CAR settings to board config for socket 940 boards.
For the a number of the socket 940 based machines, I collapsed their CAR
configurations into the socket config.
However, I have kept a number of overrides in place for the following
machines:
* broadcom/blast
* ibm/e32{5,6}
* newisys/khepri
* sunw/ultra40
* tyan/s488{0,2}
These machines used different setting than the defaults for socket 940
systems.
Signed-off-by: Warren Turkal <[email protected]>
Acked-by: Peter Stuge <[email protected]>
Build Log:
Compilation of kontron:kt690 has been broken
See the error log at
http://qa.coreboot.org/log_buildbrd.php?revision=5883&device=kt690&vendor=kontron&num=2
If something broke during this checkin please be a pain
in wt's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should
be backed out.
Best regards,
coreboot automatic build system
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
