On Fri, Nov 12, 2010 at 1:42 PM, Tobias Diedrich <[email protected]> wrote: > Set DDR2 voltage to 1.8V > > The power-on default is 1.95V, set the DDR2 voltage to > standards-conforming 1.8V. > > I also measured with a multimeter to confirm this. > > Signed-off-by: Tobias Diedrich <[email protected]> > > --- > > Index: src/mainboard/asus/m2v/romstage.c > =================================================================== > --- src/mainboard/asus/m2v/romstage.c.orig 2010-11-12 21:35:25.000000000 > +0100 > +++ src/mainboard/asus/m2v/romstage.c 2010-11-12 21:35:42.000000000 +0100 > @@ -194,6 +194,19 @@ > giv++; > } > it8712f_exit_conf(); > + > + printk(BIOS_INFO, "it8712f gpio: Setting DDR2 voltage to 1.80V\n"); Maybe this should be BIOS_SPEW. If it's the standard, I don't think it needs to be seen every boot.
Acked-by: Myles Watson <[email protected]> Thanks, Myles -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
