Hi, attached patch improves on GPIO setup, by turning off LEDs on boot (and various other things). It also documents what the GPIOs are used for on this board.
Signed-off-by: Patrick Georgi <[email protected]>
Index: coreboot-staging/src/mainboard/roda/rk886ex/romstage.c =================================================================== --- coreboot-staging.orig/src/mainboard/roda/rk886ex/romstage.c +++ coreboot-staging/src/mainboard/roda/rk886ex/romstage.c @@ -43,14 +43,27 @@ void setup_ich7_gpios(void) /* General Registers */ outl(0xbfc0f7c0, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ outl(0x70a87d83, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0x7dc07f83, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ + // ------------------------------------------------------------ + // 0 - GPO6 - Enable power of SATA channel 0 + // 0 - GPO9 - Wireless LAN power on + // 0 - GPO15 - FAN on + // 1 - GPO22 - FWH WP + // 1 - GPO24 - GPS on + // 0 - GPO25 - External Antenna Mux on + // 0 - GPO26 - BT on + // 0 - GPO27 - GSM on + outl(0x01400000, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ + // ------------------------------------------------------------ /* Output Control Registers */ outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ /* Input Control Registers */ outl(0x00002180, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ outl(0x000100e8, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x00010030, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ + // ------------------------------------------------------------ + // 1 - GPO48 - FWH TBL# + outl(0x00010000, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ + // ------------------------------------------------------------ } static void ich7_enable_lpc(void)
signature.asc
Description: This is a digitally signed message part
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
