On 02/24/2011 04:14 AM, Jonathan A. Kollasch wrote: > Hi, > > I've attempted to use the rs780 and sb800 code on a AM3 870 + SB850 > board. Raminit seems to go okay, as does the first bits of ramstage. > However, ramstage fails after the first two passes through > rs780_enable(). It stalls in get_vid_did() reading PCI config space > of device 2 (or 4). Also, the rs780 HT init code thinks the link should > run at 200MHz, maybe that's related. > > I'm aware that this code wasn't exactly intended for the 870, > but maybe someone has some hints of what to try next. > Output output output output from the serial port. Please. :)
Alex -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot