Dear coreboot readers! This is the automatic build system of coreboot.
The developer "sduplichan" checked in revision 6382 to the coreboot repository. This caused the following changes: Change Log: Add support for the ASRock E350M1, an AMD family 14h Fusion board. A video option rom must be added for UMA graphics support. It can be extracted from the supplied UEFI BIOS. ASRock E350M1 support is based on the AMD persimmon project. The major differences are SIO model and DIMM SDP addressing. With this coreboot and seabios, the board can boot DOS from a SATA drive and can boot WinPE from a USB flash drive. I was unable to get Windows setup to run. The board has a socketed SPI flash BIOS chip and a serial port header. The SIO is Nuvoton NCT5572D. Using coreboot's existing Winbond w83627hf is a good enough match to get the serial port and keyboard working. Signed-off-by: Scott Duplichan <[email protected]> Acked-by: Peter Stuge <[email protected]> Acked-by: Stefan Reinauer <[email protected]> Build Log: Compilation of asrock:939a785gmh has been broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=6382&device=939a785gmh&vendor=asrock&num=2 If something broke during this checkin please be a pain in sduplichan's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
