Thanks for your info,I'll try to use SerialICE.
2011-02-28 zxy__1127 发件人： Peter Stuge 发送时间： 2011-02-28 10:45:40 收件人： [email protected] 抄送： 主题： Re: [coreboot] about Intel calpella board(I3+QM57) Hello, zxy__1127 wrote: > I have worked on this board two weeks,now it can print from serial > port, This is a very important first step! Good news. > and stop at ddr3 initialling in file romstage.c. > I found it difficult to deal with it. I can understand that. Memory initialization is the most complex task in coreboot, and require many details to be exactly right, including e.g. the sequence of steps and timing between steps. > Is there anyone working on it? My guess is no. However, since you have the serial port working, you could try to use SerialICE (see http://serialice.org/ ) to get a better understanding of the operations done by the factory BIOS. This can help to create the code needed in coreboot to bring up a board. //Peter -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
<<14.gif>>
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
