Hi Marek, I do own this board, and it is probably one of the more painful to get ported. There is no SPI header, no serial port, and it has the gigabyte dual-BIOS mechanism to deal with. I also have an MSI e350 mini-ITX board, without any of those problems, and maybe someday I will try to make a port for it.
Tom On Tue, Apr 12, 2011 at 7:07 AM, Marek <[email protected]> wrote: > Hi Peter, > > On 12.4.2011, at 15:08, Peter Stuge <[email protected]> wrote: > >> Marek wrote: >>> with regards to recent AMD patches, >> >> Note that the patches did not include support for your mainboard. >> >> >>> I'd like to ask whether it would be possible to install coreboot on >>> Gigabyte GA AMD E350N USB3 board >>> (AMD E350, chipset FCH A50 Hudson M1, iTE 8720). >> >> The answer is, as always, no it will not work unless you make it work. >> >> The final piece of the puzzle, mainboard support, is still missing, >> but all the other 4999 pieces have been put in place for you by AMD >> and the rest of the coreboot community. > > thanks for your answer, I'm fully aware of the situation, my question was > more directed to people (if there are any) who own that MB, perhaps work on > coreboot support, or have considered it and abanonded it in the initial phase > or even made progress but were unable to continue due to various > circumstances. No answer most likely means that there isn't anyone who owns > this board so far, so I just pushed all information I could find out without > buying that board in case someone wants to buy one and add coreboot support > for it. > > Marek > >> >> >> //Peter >> >> -- >> coreboot mailing list: [email protected] >> http://www.coreboot.org/mailman/listinfo/coreboot > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot > -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
